iMX6 TinyRex Ultra Updating SPI Bootloader

From Voipac Wiki
Revision as of 09:42, 15 March 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search

iMX6 TinyRex Base Board contains SPI Flash memory which can be used for bootloader storage and acts as an alternative to default SD card firmware location. This guide shows how to flash u-boot and configure it. There is also a possibility to update efuses in an existing module to use SPI memory by default.

Recommended HW:

  • PC with USB port
  • Voipac iMX6 TinyRex Development kit in Ultra configuration
  • USB to Micro-USB cable
  • Ethernet cable

Recommended SW:

Procedure

Note: In case of booting malfunction, follow USB Booting steps to load the firmware from a PC.

Stop autoboot in your serial line terminal. Type or paste commands separately to download appropriate bootloader file from TFTP server: 

setenv ipaddr 192.168.1.150
setenv serverip 192.168.1.75
mw.b 0x10800000 0xFF 0x80000
tftp 0x10800000 u-boot-imx6-tinyrexultra-2.3.imx; sf probe 0:0;sf erase
0x0 0x80000;sf write 0x10800000 0x400 0x7fc00
Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Ultra_Updating_SPI_Bootloader&oldid=488"