iMX6 TinyRex Ultra Updating SPI Bootloader

From Voipac Wiki
Revision as of 08:33, 15 March 2021 by Voipac (talk | contribs) (Created page with "Category:iMX6 TinyRex Development kit <!-- --> iMX6 TinyRex Base Board contains SPI Flash memory which can be used for bootloader storage and acts as an alternative to def...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

iMX6 TinyRex Base Board contains SPI Flash memory which can be used for bootloader storage and acts as an alternative to default SD card firmware location. This guide shows how to flash u-boot and configure it. There is also a possibility to update efuses in an existing module to use SPI memory by default.

Recommended HW:

  • PC with USB port
  • Voipac iMX6 TinyRex Development kit in Ultra configuration
  • USB to Micro-USB cable

Recommended SW:


Procedure

RNote:

Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Ultra_Updating_SPI_Bootloader&oldid=486"