Difference between revisions of "i.MX53 SODIMM PC Changing MAC Address"
Jump to navigation
Jump to search
(Created page with "Category:i.MX53 SODIMM PC - Development kit <!-- --> MAC address (indicated on the label of the module) is written in E-Fuses for permanent identifying the module. This pa...") |
|||
| Line 3: | Line 3: | ||
MAC address (indicated on the label of the module) is written in E-Fuses for permanent identifying the module. This page shows the possibility of changing it using Barebox. | MAC address (indicated on the label of the module) is written in E-Fuses for permanent identifying the module. This page shows the possibility of changing it using Barebox. | ||
| − | == | + | == MAC address changing procedure == |
Stop autoboot and start editing the config file: | Stop autoboot and start editing the config file: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
Revision as of 11:54, 4 April 2021
MAC address (indicated on the label of the module) is written in E-Fuses for permanent identifying the module. This page shows the possibility of changing it using Barebox.
MAC address changing procedure
Stop autoboot and start editing the config file:
edit env/config
Scroll down to the last line where the current MAC address is defined:
600px
Update the MAC address. To exit the editor and save the changes, press Ctrl + D:
600px
Save the Barebox environment:
saveenv reset
To check if the new MAC address was saved, cat env/config can be used to view the configuration file. Alternatively DHCP negotiation shows the assigned IP address with the new MAC address as well:
barebox@Voipac VMX53:/ dhcp