BOE LVDS Capacitive Display SetVoipac webshop

From Voipac Wiki
Revision as of 13:45, 21 February 2025 by Voipac (talk | contribs)
Jump to navigation Jump to search

This section shows information about the BOE LVDS LCD Display with Capacitive Touch Panel (CTP) Set. The iMX93 Industrial Development Kit in this configuration is equipped with Yocto 5.0 (Scarthgap) (Linux version 6.6.52) to support LVDS display with a touchscreen layer. In this case, the display is not installed/attached to the iMX Development Baseboard.

iMX93 BOE Display.png

Required Components

The iMX93 Industrial Kit Display Set includes a compact ready-to-use solution. To assemble them together, the following mechanical and electrical accessories were designed and selected to be parts of the Display set:

  • LVDS LCD Display: BOE EV121WXM-N10-1850 (DY1212W-4856 12.1" (WXGA) TFT LCD) 1024*800 RGB with Capacitive Touch Panel (CTP)
  • DY1212W-4856 LVDS Cable
  • Voipac BOE LVDS Display Adapter
  • 1x 6-core Flat Flex Cable (FFC) 10-06-D-0050-C-4-08-4-T
  • 1x 40-core Flat Flex Cable (FFC) 05-40-D-0050-A-4-06-4-T

iMX93 BOE Display Components.png

Mechanical connection

This part shows how to correctly connect cables and parts of the BOE Display Set. To enable smooth communication between the board and the display, connect following parts as shown below:

  • DY1212W-4856 LVDS Cable to rear side of the BOE Display
  • Mount BOE LVDS Display Adapter on bottom side of the baseboard
  • Connect and link cables together with the adapter and baseboard

BOE LVDS Display rear view with cable: iMX93 BOE Display Rear View.png

Baseboard bottom side with mounted LVDS Display Adapter: iMX93 Baseboard BOE Display Adapter Bottom.png



NOTE: Due to easier handling when connecting the cables, we recommend to connect BOE LVDS Cable to the Display Adapter on baseboard as last one.

Retrieved from "https://wiki.voipac.com/index.php?title=BOE_LVDS_Capacitive_Display_Set&oldid=5368"