iMX6 TinyRex USB Booting

From Voipac Wiki
Revision as of 08:59, 15 March 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search


These steps guides through loading a bootloader via USB OTG interface. It might be useful during recovery or bootloader update.

Recommended HW:

  • PC with USB port
  • Voipac iMX6 TinyRex Development Kit
  • USB to Micro-USB cable

Recommended SW:

  • MfgTool feature
  • Serial line terminal

Procedure

  • Connect USB cable to USB port on your computer and Development Kit USB OTG port.

  • Short BOOT_MODE jumper on iMX6 TinyRex Base Board and power on the board:

300px

  • Execute Manufacturing toolkit at host PC. Open an appropriate BAT file:
Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_USB_Booting&oldid=471"