NXP MIPI-CSI Camera Set

From Voipac Wiki
Jump to navigation Jump to search

MINISASTOCSI is a MIPI-CSI interface camera kit, based on OmniVision chipset OV5640 Detection, performance and essential commands are described here.

hot-plug.png

MINISASTOCSI-Voipac-BB.png
MINISASTOCSI is a MIPI-CSI interface camera connected to iMX8M Development Baseboard

Kernel detection

root@imx8mq-voipac:~# dmesg | grep ov56
[    2.398433] ov5640_mipi 1-003c: No pin available
[    2.403090] ov5640_mipi 1-003c: No sensor pwdn pin available
[    2.408777] ov5640_mipi 1-003c: No sensor reset pin available
[    2.414571] ov5640_regulator_enable: cannot get io voltage error - err:-517
[    2.539603] ov5640_mipi 2-003c: No pin available
[    2.549079] ov5640_mipi 2-003c: No sensor reset pin available
[    2.554887] ov5640_regulator_enable: cannot get io voltage error - err:-517
[    2.999855] ov5640_mipi 1-003c: No pin available
[    3.005558] ov5640_mipi 1-003c: No sensor reset pin available
[    3.012003] ov5640_mipi 1-003c: 1-003c supply DVDD not found, using dummy regulator
[    3.019785] ov5640_mipi 1-003c: 1-003c supply AVDD not found, using dummy regulator
[    3.039290] ov5640_mipi 1-003c: Read reg error: reg=300a
[    3.044691] ov5640_mipi 1-003c: Camera is not found
[    3.051918] ov5640_mipi 2-003c: No pin available
[    3.062814] ov5640_mipi 2-003c: No sensor reset pin available
[    3.069209] ov5640_mipi 2-003c: 2-003c supply DVDD not found, using dummy regulator
[    3.076945] ov5640_mipi 2-003c: 2-003c supply AVDD not found, using dummy regulator
[    4.291092] mxc-mipi-csi2_yav 30a70000.mipi_csi: Registered sensor subdevice: ov5640_mipi 2-003c
[    4.304334] ov5640_mipi 2-003c: Camera is found

I2C detection

MINISASTOCSI camera chip is connected via I2C3. The most important address for correct detection is 0x3c.

root@imx8mq-voipac:~# i2cdetect -y 2
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: UU UU UU UU -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- UU -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

MINISASTOCSI camera can be also connected to I2C2 interface by moving 0R resistors. However second camera connected on CSI-2 interface have same address 0x3c as MINISASTOCSI camera connected on CSI-1 interface. CSI1-I2C2 and I2C3.png

Modules listing

Kernel 4.1

root@imx6-openrex:~# lsmod
Module                  Size  Used by
mxc_v4l2_capture       27624  2
ipu_bg_overlay_sdc      5385  1 mxc_v4l2_capture
ipu_still               2331  1 mxc_v4l2_capture
ipu_prp_enc             5903  1 mxc_v4l2_capture
ipu_csi_enc             3904  1 mxc_v4l2_capture
ipu_fg_overlay_sdc      6130  1 mxc_v4l2_capture
ov5647_camera_mipi_int    30566  0
adv7610_video           6373  0
v4l2_int_device         2872  4 ov5647_camera_mipi_int,adv7610_video,ipu_csi_enc,mxc_v4l2_capture
mxc_dcic                6528  0



root@imx8mq-voipac:~# lsmod
Module                  Size  Used by
crct10dif_ce           16384  1
mwifiex_pcie           45056  0
mwifiex               294912  1 mwifiex_pcie
galcore               610304  2

Resolution setting

1280x960

echo 0 > /sys/bus/i2c/devices/1-0036/ov5647_mode

1280x720

echo 1 > /sys/bus/i2c/devices/1-0036/ov5647_mode

1920x1080

echo 2 > /sys/bus/i2c/devices/1-0036/ov5647_mode

640x480

echo 3 > /sys/bus/i2c/devices/1-0036/ov5647_mode

1024x768 (default)

echo 4 > /sys/bus/i2c/devices/1-0036/ov5647_mode

960x720

echo 5 > /sys/bus/i2c/devices/1-0036/ov5647_mode

640x480 (narrow angle of view)

echo 6 > /sys/bus/i2c/devices/1-0036/ov5647_mode

Gstreamer

Capture single JPEG picture

echo 2 > /sys/bus/i2c/devices/1-0036/ov5647_mode
gst-launch-1.0 v4l2src device="/dev/video1" num-buffers=1 ! video/x-bayer,width=1920,height=1080,framerate=30/1 ! bayer2rgb ! videoconvert ! jpegenc ! filesink location=sample_1920_1080.jpeg

Video preview

echo 2 > /sys/bus/i2c/devices/1-0036/ov5647_mode
gst-launch-1.0 v4l2src device="/dev/video1" ! video/x-bayer,width=1920,height=1080,framerate=30/1 ! queue ! bayer2rgb ! videoconvert ! fbdevsink
echo 3 > /sys/bus/i2c/devices/1-0036/ov5647_mode
gst-launch-1.0 v4l2src device="/dev/video1" ! video/x-bayer,width=640,height=480,framerate=15/1 ! bayer2rgb ! videoconvert ! fbdevsink