iMX6 TinyRex Controlling the Development Kit

From Voipac Wiki
Revision as of 09:49, 10 March 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search

This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.

Controlling the Development Kit over Serial Line

Recommended HW:

Recommended SW:

  • Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)

Default serial port settings:

  • Speed (baud): 115200
  • Data bits: 8
  • Stop bits: 1
  • Parity: None
  • Flow control: None


Controlling the development kit using TeraTerm:
600px

Using External Monitor and USB Keyboard

Recommended HW:

  • External monitor with HDMI connector (HDMI to VGA adapter is required for VGA monitor)
  • Voipac iMX6 TinyRex Development Kit
  • HDMI High Speed cable
  • USB keyboard and USB mouse


Controlling the development kit using external monitor and USB keyboard:
600px

Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Controlling_the_Development_Kit&oldid=314"