iMX6 TinyRex Controlling the Development Kit

This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.

Controlling the Development Kit over Serial Line

Recommended HW: PC with USB port Voipac iMX6 TinyRex Development Kit TTL-232R-3V3 ( FTDI ) cable

Recommended SW: Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)

Default serial port settings: Speed (baud): 115200 Data bits: 8 Stop bits: 1 Parity: None Flow control: None

Controlling the development kit using TeraTerm:
600px

Using External Monitor and USB Keyboard

Recommended HW: PC with USB port Voipac iMX6 TinyRex Development Kit External monitor with HDMI connector (HDMI to VGA adapter is required for VGA monitor) Voipac iMX6 TinyRex Development Kit HDMI High Speed cable USB keyboard and USB mouse

Controlling the development kit using external monitor and USB keyboard:
600px