iMX6 TinyRex Controlling the Development Kit

This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.

Controlling the Development Kit over Serial Line

Recommended HW: PC with USB port Voipac iMX6 TinyRex Development Kit TTL-232R-3V3 ( FTDI ) cable

Recommended SW: Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)

Default serial port settings: Speed (baud): 115200 Data bits: 8 Stop bits: 1 Parity: None Flow control: None

Controlling the development kit using TeraTerm: 800px