iMX6 TinyRex Connecting the Components and Cables

From Voipac Wiki
Revision as of 09:15, 10 March 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search

Prepare base board and plug in (bootable) microSD card, TTL-232R-3V3 FTDI cable, Ethernet cable, HDMI cable and other devices or interfaces you need. Plug the power supply connector in. 800px

IMPORTANT! Be careful when connecting TTL-232R FTDI cable to the base board

Check if the cable conductor 1 (black wire) is connected to Pin 1 (Header connector J10 – TTL-232R FTDI) on the base board.

Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Connecting_the_Components_and_Cables&oldid=281"