iMX6 OpenRex UltraPlus U-Boot

From Voipac Wiki
Revision as of 20:32, 7 April 2021 by Voipac (talk | contribs) (Created page with "Category:iMX6 OpenRex SBC Category:iMX6 OpenRex UltraPlus Category:U-Boot <!-- --> <div style="float:right">__TOC__</div> U-Boot is a bootloader responsible for ha...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

U-Boot is a bootloader responsible for hardware initialization, loading and booting Linux kernel. It is also used for SBC flashing.

Build

Set toolchain

Export toolchain variables for every related terminal session.

Initial steps

Create working directory 

mkdir -pv ~/workdir/imx6/bootloader/

U-Boot v2015.04

Download and extract source code

cd ~/workdir/imx6/bootloader/
git clone -b uboot-imx-v2015.04 --single-branch https://github.com/voipac/uboot-imx uboot-imx-v2015.04-rex
cd uboot-imx-v2015.04-rex

Compile

Output file is called u-boot.imx. All the compiled images are intended for production usage.

Compile for SD3 and Linux/Yocto

cd ~/workdir/imx6/bootloader/uboot-imx-v2015.04-rex
make distclean
make mx6openrexultra_config
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
cp -av u-boot.imx /srv/tftp/imx6/u-boot-imx6-openrexultra.imx

Compile for SATA and Linux/Yocto

cd ~/workdir/imx6/bootloader/uboot-imx-v2015.04-rex
make distclean
make mx6openrexultrasata_config
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
cp -av u-boot.imx /srv/tftp/imx6/u-boot-imx6-openrexultrasata.imx

Compile for SD3 and Android 7.x

cd ~/workdir/imx6/bootloader/uboot-imx-v2015.04-rex
make distclean
make mx6openrexultraandroid_config
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
cp -av u-boot.imx /srv/tftp/imx6/u-boot-imx6-openrexultraandroid.imx

How to Flash a new version

Flash into SPI Flash using U-Boot

setenv ipaddr 192.168.0.150
setenv serverip 192.168.0.1
mw.b 0x10800000 0xFF 0x80000
tftp 0x10800000 imx6/u-boot-imx6-openrex*.imx
if sf probe 2:2; then sf erase 0x0 0x80000;sf write 0x10800000 0x400 0x7fc00; fi

Flashing log: 

U-Boot 2015.04-gfd6325c-dirty (Mar 11 2017 - 23:09:03)

CPU:   Freescale i.MX6QP rev1.1 at 792 MHz
CPU:   Temperature 34 C
Reset cause: POR
Board: MX6 OpenRex - ultra
I2C:   ready
DRAM:  512 MiB
PMIC:  PFUZE100 ID=0x10
MMC:   FSL_SDHC: 0
SF: Detected SST26VF032B with page size 256 Bytes, erase size 4 KiB, total 4 MiB
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Normal Boot
Hit any key to stop autoboot:  0 
OpenRex U-Boot > setenv ipaddr 192.168.1.150
OpenRex U-Boot > setenv serverip 192.168.1.1
OpenRex U-Boot > mw.b 0x10800000 0xFF 0x80000
OpenRex U-Boot > tftp 0x10800000 imx6/u-boot-imx6-openrexultra.imx
Using FEC device
TFTP from server 192.168.1.1; our IP address is 192.168.1.150
Filename 'imx6/u-boot-imx6-openrexultra.imx'.
Load address: 0x10800000
Loading: #######################
         2.8 MiB/s
done
Bytes transferred = 334848 (51c00 hex)
OpenRex U-Boot > sf probe 2:2;sf erase 0x0 0x80000;sf write 0x10800000 0x400 0x7fc00
SF: Detected SST26VF032B with page size 256 Bytes, erase size 4 KiB, total 4 MiB
SF: 524288 bytes @ 0x0 Erased: OK
SF: 523264 bytes @ 0x400 Written: OK
OpenRex U-Boot >

Flash into SATA using U-Boot

setenv ipaddr 192.168.0.150
setenv serverip 192.168.0.1
mw.b 0x10800000 0xFF 0x80000
tftp 0x10800000 imx6/u-boot-imx6-openrex*sata.imx
if sata init; then sata write 0x10800000 0x2 0x3ff; fi

Flashing log: 

U-Boot 2015.04-g8efb1bd-dirty (Jul 28 2017 - 15:47:05)

CPU:   Freescale i.MX6QP rev1.0 at 792 MHz
CPU:   Temperature 37 C
Reset cause: WDOG
Board: MX6 OpenRex - ultra
I2C:   ready
DRAM:  3.8 GiB
WARNING: Caches not enabled
PMIC:  PFUZE100 ID=0x10
MMC:   FSL_SDHC: 0
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part 
SATA Device Info:
S/N: E0117219300000000116
Product model number: 8GB SATA Flash Drive
Firmware version: SFDK003A
Capacity: 15649200 sectors
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Normal Boot
Hit any key to stop autoboot:  0 
OpenRex U-Boot > setenv ipaddr 192.168.0.150
OpenRex U-Boot > setenv serverip 192.168.0.1
OpenRex U-Boot > mw.b 0x10800000 0xFF 0x80000
OpenRex U-Boot > tftp 0x10800000 imx6/u-boot-imx6-openrexultrasata.imx
Using FEC device
TFTP from server 192.168.0.1; our IP address is 192.168.0.150
Filename 'imx6/u-boot-imx6-openrexultrasata.imx'.
Load address: 0x10800000
Loading: ########################
         2.6 MiB/s
done
Bytes transferred = 337968 (52830 hex)
OpenRex U-Boot > if sata init; then sata write 0x10800000 0x2 0x3ff; fi  
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part 
SATA Device Info:
S/N: E0117219300000000116
Product model number: 8GB SATA Flash Drive
Firmware version: SFDK003A
Capacity: 15649200 sectors

SATA write: device 0 block # 2, count 1023 ... 1023 blocks written: OK
OpenRex U-Boot >

Flash into SATA using Linux

sudo dd if=u-boot-imx6-openrex*sata.imx of=/dev/sdx bs=512 seek=2 conv=fsync

Configure

Manually erase configuration

OpenRex U-Boot > sf probe 2:2       
SF: Detected SST26VF032B with page size 256 Bytes, erase size 4 KiB, total 4 MiB
OpenRex U-Boot > sf erase 0x80000 0x2000
SF: 8192 bytes @ 0x80000 Erased: OK
OpenRex U-Boot > reset

Manual boot options

Manually boot from SPI3

mw.l 0x020d8040 0x2A000030; mw.l 0x020d8044 0x10000000; reset

Manually boot from SD2

mw.l 0x020d8040 0x00002840; mw.l 0x020d8044 0x10000000; reset

Manually boot from SATA

mw.l 0x020d8040 0x00001020; mw.l 0x020d8044 0x10000000; reset
Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_OpenRex_UltraPlus_U-Boot&oldid=1433"