TFT EDT Display Set

From Voipac Wiki
Revision as of 15:44, 7 April 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search

This section shows information about TFT Display EDT set. This multitouch capacitive display is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development kits. The display is supported in OS Linux, Android and Qt4e.

Datasheet of the display can be downloaded here.

Hardware connection

To make the physiucal connection between the board and the display easier, TFT EDT display adapter was designed to connect the set together. i.MX25 SODIMM Base Board-TFT EDT display adapter-Display connection.jpg
To implement the display capabilities, following connections need to be made:

  • TFT EDT display adapter is plugged into the Base Board H200
  • Additional signals required between adapter H2 header and H501 on the Base Board are established using a 4-wire connection
  • All the connections between the TFT EDT display adapter and the display are established using a flexible flat cable

i.MX25 SODIMM Base Board-TFT EDT display adapter-Base board connection.jpg

Retrieved from "https://wiki.voipac.com/index.php?title=TFT_EDT_Display_Set&oldid=1409"