i.MX53 SODIMM PC Loading bootloader

From Voipac Wiki
Revision as of 09:12, 3 April 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search

This page shown the steps how to initiate On-Chip Debugging and load bootloader into i.MX53 SODIMM PC - Development kit.

JTAG Debugger and Programmer Installation

  • Connect JTAG Cable to USB port on the computer. JTAG device should be automatically recognized and prepared for usage.
  • Download OpenOCD v0.6.0 software
  • Unzip the files

400px

Running Open On-Chip Debugger

Locate the folder where the software has been unpacked. Run OpenOCD utility in command line (by using Total Commander or Windows Command Prompt): 

openocd -f vmx53w.cfg

600px

Debugging session is opened and running:
600px

















Retrieved from "https://wiki.voipac.com/index.php?title=i.MX53_SODIMM_PC_Loading_bootloader&oldid=1285"