iMX6 OpenRex Ultra Creating Bootable microSD Card

From Voipac Wiki
Revision as of 13:55, 2 April 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search

The recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. The following example shows steps used for iMX6 OpenRex SBC in Ultra configuration.

Recommended HW:

  • PC with microSD port (or an external SD reader)
  • microSD card

Recommended SW:

Windows

Using USBWriter feature

Unpack the downloaded package. GZ files can be opened using Total Commander or by installing TAR-GZ file extension.

Open USBWriter. Browse source file (appropriate fsl-image). Select target device:
400px

Click on Write button and confirm the procedure:
400px

400px

Bootable microSD Card is now created and prepared for use:
400px

Linux

Downloading image

mkdir -pv ~/workdir/imx6/rootfs/yocto
cd ~/workdir/imx6/rootfs/yocto
wget http://downloads.voipac.com/files/iMX6_OpenRex_SBC/software/yocto/binaries/fsl-image-gui-imx6-openrexultra-2.4.sdcard.gz

Extracting binary files

gunzip -c fsl-image-gui-imx6-openrexultra-2.4.sdcard.gz | sudo dd of=/dev/mmcblk0 conv=sync bs=64K
Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_OpenRex_Ultra_Creating_Bootable_microSD_Card&oldid=1160"