iMX6 OpenRex Toolchain

From Voipac Wiki
Revision as of 19:30, 1 April 2021 by Voipac (talk | contribs) (Created page with "Category:iMX6 OpenRex SBC Category:Toolchain <!-- --> <div style="float:right">__TOC__</div> == GNUEABI toolchain == === Core image toolchain === ==== Install ==== Too...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

GNUEABI toolchain

Core image toolchain

Install

Toolchain for Operating Systems running Linux kernel:

mkdir -pv ~/workdir/downloads
cd ~/workdir/downloads
wget -c http://downloads.voipac.com/files/iMX6_OpenRex_SBC/software/toolchain/poky-glibc-x86_64-core-image-base-cortexa9hf-vfp-neon-toolchain-1.7.sh
chmod a+x poky-glibc-x86_64-core-image-base-cortexa9hf-vfp-neon-toolchain-1.7.sh
./poky-glibc-x86_64-core-image-base-cortexa9hf-vfp-neon-toolchain-1.7.sh

Install log

marek@jessie:~/workdir/downloads$ ./poky-glibc-x86_64-core-image-base-cortexa9hf-vfp-neon-toolchain-1.7.sh 
Enter target directory for SDK (default: /opt/poky/1.7): 
You are about to install the SDK to "/opt/poky/1.7". Proceed[Y/n]?
[sudo] password for marek: 
Extracting SDK...done
Setting it up...sudo: ignoring time stamp from the future
[sudo] password for marek: 
done
SDK has been successfully set up and is ready to be used.

Setup

source /opt/poky/1.7/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi

VPAC image toolchain

Install

Toochain for Operating Systems running Linux kernel:

mkdir -pv ~/workdir/downloads
cd ~/workdir/downloads
wget -c http://downloads.voipac.com/files/iMX6_OpenRex_SBC/software/toolchain/poky-glibc-x86_64-vpac-image-full-cmdline-cortexa9hf-vfp-neon-toolchain-1.7.sh
chmod a+x poky-glibc-x86_64-vpac-image-full-cmdline-cortexa9hf-vfp-neon-toolchain-1.7.sh
./poky-glibc-x86_64-vpac-image-full-cmdline-cortexa9hf-vfp-neon-toolchain-1.7.sh

Install log

marek@jessie:~/workdir/downloads$ ./poky-glibc-x86_64-vpac-image-full-cmdline-cortexa9hf-vfp-neon-toolchain-1.7.sh
SDK has been successfully set up and is ready to be used.
Enter target directory for SDK (default: /opt/poky/1.7): 
You are about to install the SDK to "/opt/poky/1.7". Proceed[Y/n]?
Extracting SDK...done
Setting it up...done
SDK has been successfully set up and is ready to be used.

Setup

source /opt/poky/1.7/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi