iMX6 TinyRex Ultra Creating Bootable microSD Card

From Voipac Wiki
Revision as of 08:03, 15 March 2021 by Voipac (talk | contribs)
Jump to navigation Jump to search

On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX6 TinyRex Max Module.

Recommended HW:

  • PC with microSD port
  • microSD card

Recommended SW:

Using USBWriter feature

Open USBWriter. Browse source file (appropriate fsl-image). Select target device:
400px

Click on Write button and confirm the procedure:
400px

400px

Bootable microSD Card is now created and prepared for use:
400px

Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Ultra_Creating_Bootable_microSD_Card&oldid=457"