iMX6 TinyRex Ultra Creating Bootable microSD Card

From Voipac Wiki
Revision as of 13:04, 10 March 2021 by Voipac (talk | contribs) (Created page with "On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX6 TinyRex Max Module. Recommended HW:

  • PC with microSD port
  • microSD card

Recommended SW:


Open USBWriter. Browse source file (appropriate fsl-image). Select target device.
600px
Click on Write button and confirm the procedure.
600px 600px 600px
Bootable microSD Card is now created and prepared for use.

Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Ultra_Creating_Bootable_microSD_Card&oldid=328"