iMX6 TinyRex Lite Controlling the Development Kit
Revision as of 13:28, 15 March 2021 by Voipac (talk | contribs) (Created page with "Category:iMX6 TinyRex Development kit <!-- --> <div style="float:right">__TOC__</div> This page guides though the first steps of controlling and operating the development...")
This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.
Controlling the Development Kit over Serial Line
Recommended HW:
- PC with USB port
- Voipac iMX6 TinyRex Development Kit
- TTL-232R-3V3 ( FTDI ) cable
Recommended SW:
- Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)
Default serial port settings:
- Speed (baud): 115200
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow control: None
Controlling the development kit using TeraTerm:
600px
Using External Monitor and USB Keyboard
Recommended HW:
- External monitor with HDMI connector (HDMI to VGA adapter is required for VGA monitor)
- Voipac iMX6 TinyRex Development Kit
- HDMI High Speed cable
- USB keyboard and USB mouse
Controlling the development kit using external monitor and USB keyboard:
600px
