iMX6 TinyRex Controlling the Development Kit

From Voipac Wiki

Revision as of 09:21, 10 March 2021 by Voipac (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.

Controlling the Development Kit over Serial Line

Recommended HW:

PC with USB port
Voipac iMX6 TinyRex Development Kit
TTL-232R-3V3 ( FTDI ) cable

Recommended SW:

Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)

Default serial port settings:

Speed (baud): 115200
Data bits: 8
Stop bits: 1
Parity: None
Flow control: None

Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Controlling_the_Development_Kit&oldid=302"

iMX6 TinyRex Development kit