Difference between revisions of "iMX6 TinyRex Pro Creating Bootable microSD Card"

From Voipac Wiki
Jump to navigation Jump to search
Line 12: Line 12:
 
''''' Recommended SW: '''''
 
''''' Recommended SW: '''''
 
* [http://downloads.voipac.com/files/iMX6_TinyRex_Development_kit/tools/USBWriter-1.3.zip USBWriter]
 
* [http://downloads.voipac.com/files/iMX6_TinyRex_Development_kit/tools/USBWriter-1.3.zip USBWriter]
* [http://downloads.voipac.com/files/iMX6_TinyRex_Development_kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexpro-1.3.sdcard Appropriate Image file]
+
* [http://downloads.voipac.com/files/iMX6_TinyRex_Development_kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexpro-2.3.sdcard.gz Appropriate Image file]
  
 
== Windows ==
 
== Windows ==
Line 32: Line 32:
 
mkdir -pv ~/workdir/imx6/rootfs/yocto
 
mkdir -pv ~/workdir/imx6/rootfs/yocto
 
cd ~/workdir/imx6/rootfs/yocto
 
cd ~/workdir/imx6/rootfs/yocto
wget http://downloads.voipac.com/files/iMX6_TinyRex_Development_kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexpro-1.3.sdcard
+
wget http://downloads.voipac.com/files/iMX6_TinyRex_Development_kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexpro-2.3.sdcard.gz
 
</syntaxhighlight>
 
</syntaxhighlight>
  
 
=== Extracting binary files ===
 
=== Extracting binary files ===
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
sudo dd if=fsl-image-gui-imx6-tinyrexpro-1.1.sdcard of=/dev/mmcblk0 conv=sync bs=64K
+
gunzip -c fsl-image-gui-imx6-tinyrexpro-2.3.sdcard.gz | sudo dd of=/dev/mmcblk0 conv=sync bs=64K
 
</syntaxhighlight>
 
</syntaxhighlight>
 
or
 
or
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
gunzip -c fsl-image-gui-imx6-tinyrexpro-2.3.sdcard.gz | sudo dd of=/dev/mmcblk0 conv=sync bs=64K
+
sudo dd if=fsl-image-gui-imx6-tinyrexpro-1.3.sdcard of=/dev/mmcblk0 conv=sync bs=64K
 
</syntaxhighlight>
 
</syntaxhighlight>

Revision as of 07:48, 27 March 2021

On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX6 TinyRex Pro Module.

Recommended HW:

  • PC with microSD port (or an external SD reader)
  • microSD card

Recommended SW:

Windows

Using USBWriter feature

Open USBWriter. Browse source file (appropriate fsl-image). Select target device:
400px

Click on Write button and confirm the procedure:
400px

400px

Bootable microSD Card is now created and prepared for use:
400px

Linux

Downloading image

mkdir -pv ~/workdir/imx6/rootfs/yocto
cd ~/workdir/imx6/rootfs/yocto
wget http://downloads.voipac.com/files/iMX6_TinyRex_Development_kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexpro-2.3.sdcard.gz

Extracting binary files

gunzip -c fsl-image-gui-imx6-tinyrexpro-2.3.sdcard.gz | sudo dd of=/dev/mmcblk0 conv=sync bs=64K

or

sudo dd if=fsl-image-gui-imx6-tinyrexpro-1.3.sdcard of=/dev/mmcblk0 conv=sync bs=64K