Difference between revisions of "iMX6 TinyRex USB Booting"
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
== Procedure == | == Procedure == | ||
| − | * Connect USB cable to USB port on your computer and Development Kit USB OTG port. | + | * Connect USB cable to USB port on your computer and Development Kit USB OTG port. |
* Short BOOT_MODE jumper on iMX6 TinyRex Base Board and power on the board:<br /> | * Short BOOT_MODE jumper on iMX6 TinyRex Base Board and power on the board:<br /> | ||
| − | [[image:iMX6_TinyRex_Development_kit-Boot_mode_USB.jpg|300px]] | + | [[image:iMX6_TinyRex_Development_kit-Boot_mode_USB.jpg|300px]]<br /> |
* Execute Manufacturing toolkit at host PC. Open an appropriate BAT file: | * Execute Manufacturing toolkit at host PC. Open an appropriate BAT file: | ||
Revision as of 08:07, 15 March 2021
These steps guides through loading a bootloader via USB OTG interface. It might be useful during recovery or bootloader update.
Recommended HW:
- PC with USB port
- Voipac iMX6 TinyRex Development Kit
- USB to Micro-USB cable
Recommended SW:
- MfgTool feature
- Serial line terminal
Procedure
- Connect USB cable to USB port on your computer and Development Kit USB OTG port.
- Short BOOT_MODE jumper on iMX6 TinyRex Base Board and power on the board:
- Execute Manufacturing toolkit at host PC. Open an appropriate BAT file: