Difference between revisions of "iMX8M Industrial Accessing and Testing Peripherals"
Jump to navigation
Jump to search
| Line 80: | Line 80: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | '''''Input:''''' Connect headphones into | + | '''''Input:''''' Connect headphones into LINE_OUT jack connector<br /> |
'''''Output:''''' Audio file is played and heard | '''''Output:''''' Audio file is played and heard | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
Revision as of 15:40, 26 January 2023
The initial operations with the iMX8M Industrial Development Kit interfaces are presented on this page. For more specific information such as display options, camera capabilities or industrial modular extensions, refer to the dedicated Peripherals and Accessories section.
Mandatory components
Hardware
- iMX8M Industrial Module
- iMX8M Development Baseboard
- DC power supply (5V, 8A, 40W)
Peripherals and Accessories
- 1x FullHD HDMI monitor with Audio output (default)
- 1x FullHD DisplayPort monitor with Audio output (optional)
- Wifi and Bluetooth antenna set
- 1x MicroSDHC card Class 10 or higher
- 1x USB Flash drive 3.0
- Headphones
- Analog external microphone
Cables
- USB Micro-B cable for serial console
- USB-C cable for module flashing
- Ethernet cable
- HDMI cable (default)
- DisplayPort cable (optional)
Audio
Input: Search kernel log for wm8904 chip
Output: Audio chip is detected and bound as an output and input device
[ 1.864809] fsl-asoc-card sound-wm8904: failed to find codec device [ 2.155773] wm8904 0-001a: 0-001a supply DCVDD not found, using dummy regulator [ 2.163163] wm8904 0-001a: 0-001a supply DBVDD not found, using dummy regulator [ 2.170561] wm8904 0-001a: 0-001a supply AVDD not found, using dummy regulator [ 2.177846] wm8904 0-001a: 0-001a supply CPVDD not found, using dummy regulator [ 2.185209] wm8904 0-001a: 0-001a supply MICVDD not found, using dummy regulator [ 2.197860] wm8904 0-001a: revision A [ 2.699093] debugfs: Directory '308b0000.sai' with parent 'wm8904-audio' already present! [ 2.707395] fsl-asoc-card sound-wm8904: wm8904-hifi <-> 308b0000.sai mapping ok [ 2.714808] fsl-asoc-card sound-wm8904: ASoC: no DMI vendor name! [ 3.145901] #1: wm8904-audio
Input: Run amixer command
Output: Current card settings are displayed
root@imx8mq-voipac:~# amixer -c1 Simple mixer control 'Headphone',0 Capabilities: volume pswitch Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 63 Front Left: 46 [73%] [-11.00dB] Playback [on] Front Right: 45 [71%] [-12.00dB] Playback [on] Simple mixer control 'Headphone ZC',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Line Output',0 Capabilities: volume pswitch Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 63 Front Left: 57 [90%] [0.00dB] Playback [on] Front Right: 57 [90%] [0.00dB] Playback [on] Simple mixer control 'Line Output ZC',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] ...
Input: Connect headphones into LINE_OUT jack connector
Output: Audio file is played and heard
root@imx8mq-voipac:~# aplay multimedia/sample.wav Playing WAVE 'multimedia/sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@imx8mq-voipac:~# aplay -D sysdefault:CARD=wm8904audio multimedia/sample.wav Playing WAVE 'multimedia/sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Input: Boot-up the board with HDMI cable plugged into the monitor
Output: Audio file is played and heard
root@imx8mq-voipac:~# aplay -D sysdefault:CARD=imxaudiohdmi multimedia/sample.wav Playing WAVE 'multimedia/sample.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Input: Plug headphones into HP_OUT jack connector and analog external microphone to MIC jack connector
Output: Sound recorder by microphone is played in headphones
root@imx8mq-voipac:~# amixer set 'Capture' '31' root@imx8mq-voipac:~# amixer set 'Capture Input' ADC root@imx8mq-voipac:~# amixer set 'Left Capture Inverting Mux' 'IN2L' root@imx8mq-voipac:~# amixer set 'Right Capture Inverting Mux' 'IN2R' root@imx8mq-voipac:~# arecord -D sysdefault:CARD=wm8904audio -t wav -f cd | aplay -D sysdefault:CARD=wm8904audio
Note: Microphone and headphones setup can also be graphically inspected:
root@imx8mq-voipac:~# alsamixer
Input: Verify Digital microphone
Output: Microphone sound is played in headphones
root@imx8mq-voipac:~# amixer -c1 sset "Capture Input" "DMIC" root@imx8mq-voipac:~# arecord -D sysdefault:CARD=wm8904audio -t wav -f cd | aplay -D sysdefault:CARD=wm8904audio
WiFi
NOTE: Describe how WiFi + Bluetooth module is used on the Max / Pro configuration. Explain Basic Wireless capabilities.
Input: None
Output: Device driver is available
root@imx8mq-voipac:~# dmesg | grep mwifiex [ 5.145232] mwifiex_pcie 0000:01:00.0: enabling device (0000 -> 0002) [ 5.166217] mwifiex_pcie: PCI memory map Virt0: (____ptrval____) PCI memory map Virt2: (____ptrval____) [ 6.133666] mwifiex_pcie 0000:01:00.0: info: FW download over, size 632240 bytes [ 7.004061] mwifiex_pcie 0000:01:00.0: WLAN FW is active [ 7.049670] mwifiex_pcie 0000:01:00.0: Unknown api_id: 3 [ 7.055024] mwifiex_pcie 0000:01:00.0: Unknown api_id: 4 [ 7.060385] mwifiex_pcie 0000:01:00.0: Unknown GET_HW_SPEC TLV type: 0x217 [ 7.075700] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p179) [ 7.080505] mwifiex_pcie 0000:01:00.0 wlp1s0: renamed from mlan0 [ 7.083959] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p179)
Chek if interface is present
root@imx8mq-voipac:~# ip addr show dev wlp1s0
3: wlp1s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 78:c4:0e:a0:32:16 brd ff:ff:ff:ff:ff:ff
Check connection
Input: Scan the available WiFi networks
Output: Networks are scanned and in-depth information are displayed
root@imx8mq-voipac:~# ifconfig wlp1s0 up && iw dev wlp1s0 scan
BSS 94:27:90:7f:c3:d3(on wlp1s0)
TSF: 1213185029341 usec (14d, 00:59:45)
freq: 2442
beacon interval: 100 TUs
capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
signal: -73.00 dBm
last seen: 4056 ms ago
SSID: HH40V_C3D3
Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0
DS Parameter set: channel 7
Country: SK Environment: Indoor/Outdoor
Channels [1 - 13] @ 20 dBm
ERP: <no flags>
Extended supported rates: 24.0 36.0 48.0 54.0
HT capabilities:
Capabilities: 0x1ad
RX LDPC
HT20
SM Power Save disabled
RX HT20 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
HT operation:
* primary channel: 7
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 1
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities:
* HT Information Exchange Supported
* Extended Channel Switching
* SSID List
* Operating Mode Notification
WMM: * Parameter version 1
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
RSN: * Version: 1
* Group cipher: CCMP
* Pairwise ciphers: CCMP
* Authentication suites: PSK
* Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* Response Type: 3 (AP)
* UUID: 87654321-9abc-def0-1234-942790c36dc7
* Manufacturer: TCL.org
* Model: WAP
* Model Number: 123
* Serial Number: 12345
* Primary Device Type: 6-0050f204-1
* Device name: TCL AP
* Config methods:
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
BSS 34:e8:94:5c:06:80(on wlp1s0)
TSF: 787677017722 usec (9d, 02:47:57)
freq: 2462
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime (0x0411)
signal: -73.00 dBm
last seen: 3952 ms ago
SSID: OrangeFlybox_0680
Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0
DS Parameter set: channel 11
ERP: Barker_Preamble_Mode
Extended supported rates: 6.0 12.0 24.0 48.0
HT capabilities:
Capabilities: 0x106e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT RX MCS rate indexes supported: 0-15, 32
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 11
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: 20 MHz
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
WPA: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: TKIP CCMP
* Authentication suites: PSK
RSN: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: TKIP CCMP
* Authentication suites: PSK
* Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
WMM: * Parameter version 1
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS Load:
* station count: 3
* channel utilisation: 27/255
* available admission capacity: 31250 [*32us]
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities:
* HT Information Exchange Supported
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* AP setup locked: 0x01
* Response Type: 3 (AP)
* UUID: 38833092-3092-1883-9c77-34e8945c06c4
* Manufacturer: TP-LINK
* Model: Archer MR200
* Model Number: 1.0
* Serial Number: 1.0
* Primary Device Type: 6-0050f204-1
* Device name: AC750 Wireless Dual Band 4G LTE
* Config methods: Label, Display, Keypad
* RF Bands: 0x1
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
BSS 34:e8:94:5b:f8:04(on wlp1s0)
TSF: 1210179077454 usec (14d, 00:09:39)
freq: 2462
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime (0x0411)
signal: -50.00 dBm
last seen: 3432 ms ago
SSID: REDARROW
Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0
DS Parameter set: channel 11
Extended supported rates: 6.0 12.0 24.0 48.0
TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x2
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* AP setup locked: 0x01
* UUID: 38833092-3092-1883-9c77-34e8945bf8c4
* RF Bands: 0x1
* Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
ERP: Barker_Preamble_Mode
HT capabilities:
Capabilities: 0x106e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT RX MCS rate indexes supported: 0-15, 32
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 11
* secondary channel offset: no secondary
* STA channel width: 20 MHz
* RIFS: 0
* HT protection: no
* non-GF present: 0
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities:
* HT Information Exchange Supported
WPA: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: TKIP CCMP
* Authentication suites: PSK
RSN: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: TKIP CCMP
* Authentication suites: PSK
* Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
WMM: * Parameter version 1
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS Load:
* station count: 0
* channel utilisation: 47/255
* available admission capacity: 31250 [*32us]
To connect to the desired WiFi network, edit file located in /etc/wpa_supplicant.conf and update ssid and passphrase fields.
root@imx8mq-voipac:~# cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
update_config=1
network={
ssid="SSID_FOR_WIFI_NETWORK"
scan_ssid=1
key_mgmt=WPA-PSK
psk="WIFI_NETWORK_PASSWORD"
}
- start wpa_supplicant
root@imx8mq-voipac:~# wpa_supplicant -i wlp1s0 -c/etc/wpa_supplicant.conf & root@imx8mq-voipac:~# Successfully initialized wpa_supplicant rfkill: Cannot open RFKILL control device wlp1s0: Trying to associate with 40:a5:ef:c0:70:62 (SSID='CPE_C0[ 188.254851] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'CPE_C07061' bssid 40:a5:ef:c0:70:62 7061' freq=2462 MHz) [ 188.334475] mwifiex_pcie 0000:01:00.0: info: associated to bssid 40:a5:ef:c0:70:62 successfully wlp1s0: Associated with 40:a5:ef:c0:70:62 wlp1s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 [ 188.351598] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready wlp1s0: WPA: Key negotiation completed with 40:a5:ef:c0:70:62 [PTK=CCMP GTK=CCMP] wlp1s0: CTRL-EVENT-CONNECTED - Connection to 40:a5:ef:c0:70:62 completed [id=0 id_str=]
- run udhcpc
udhcpc -i wlp1s0
Bluetooth
Input: None
Output: Remote device is recognized after scan
# attach module
root@imx8mq-voipac:~# hciattach /dev/ttymxc2 any 115200 flow
[ 63.137693] Bluetooth: HCI UART driver ver 2.3
[ 63.142196] Bluetooth: HCI UART protocol H4 registered
[ 63.147407] Bluetooth: HCI UART protocol BCSP registered
[ 63.153061] Bluetooth: HCI UART protocol LL registered
[ 63.158263] Bluetooth: HCI UART protocol ATH3K registered
[ 63.163719] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 63.170309] Bluetooth: HCI UART protocol Broadcom registered
[ 63.176113] Bluetooth: HCI UART protocol QCA registered
Device setup complete
# put hci0 device up
root@imx8mq-voipac:~# hciconfig hci0 up
# scan for remote bluetooth devices (enable bluetooth on phone and make it discoverable)
root@imx8mq-voipac:~# hcitool scan
Scanning ...
Devices:
hci0 00:0D:18:01:5A:B3
Ethernet
Input: None
Output: Device driver is available
Note: MAC address should be identical with the address on the sticker placed on the board
root@imx8mq-voipac:~# ip addr show dev eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0d:15:01:50:92 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.122/24 brd 192.168.10.255 scope global dynamic eth0
valid_lft 86103sec preferred_lft 86103sec
inet6 fe80::20d:15ff:fe01:5092/64 scope link
valid_lft forever preferred_lft forever
Input: Plug Ethernet cable into connector
Output: IPv4 address is assigned
[ 348.300585] fec 30be0000.ethernet eth0: Link is Down [ 350.350853] fec 30be0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
PCI Express socket + Micro SIM slot
NOTE: Add commands and logs while using this Wireless card
M.2 socket + Micro SIM slot
Note: Use SATA M.2 card as testing example?
USB 3.0
NOTE: Perform read/write performance test
Input: Plug USB flash drive into USB connector
Output: Plugged USB device is listed
root@vmx25:~# lsusb Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 125f:d31a A-DATA Technology Co., Ltd. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Input: Generate a dummy file and copy it into USB flash drive
Output: Generated file and copied file have the same checksum
root@imx8mq-voipac:~# mount /dev/sda1 /media/ root@imx8mq-voipac:~# rm -f file.txt /media/file.txt root@imx8mq-voipac:~# dd if=/dev/urandom of=file.txt count=1024 bs=1024 1024+0 records in 1024+0 records out root@imx8mq-voipac:~# cp file.txt /media/ root@imx8mq-voipac:~# md5sum file.txt /media/file.txt 200a9fd3e9850fcedf85ed50d4c4733d file.txt 200a9fd3e9850fcedf85ed50d4c4733d /media/file.txt root@imx8mq-voipac:~# rm file.txt /media/file.txt root@imx8mq-voipac:~# umount /media
USB-C
This connector is primarily used for flashing new binaries into the iMX8M Industrial Module. More information can be found on the dedicated module flashing page.
Alternatively, USB-C connector can be utilised as general USB storage:
root@imx8mq-voipac:~# fdisk -l /dev/sda Disk /dev/sda: 29 GB, 30784094208 bytes, 60125184 sectors 3742 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sda1 0,0,33 1023,254,63 32 60125183 60125152 28.6G c Win95 FAT32 (LBA)
Input: Generate a dummy file and copy it into USB flash drive
Output: Generated file and copied file have the same checksum
root@imx8mq-voipac:~# mount /dev/sda1 /media/ root@imx8mq-voipac:~# rm -f file.txt /media/file.txt root@imx8mq-voipac:~# dd if=/dev/urandom of=file.txt count=1024 bs=1024 1024+0 records in 1024+0 records out root@imx8mq-voipac:~# cp file.txt /media/ root@imx8mq-voipac:~# md5sum file.txt /media/file.txt 200a9fd3e9850fcedf85ed50d4c4733d file.txt 200a9fd3e9850fcedf85ed50d4c4733d /media/file.txt root@imx8mq-voipac:~# rm file.txt /media/file.txt root@imx8mq-voipac:~# umount /media
USB Micro-B serial console
Input: Connect USB console cable into the base board connector and open serial console with baud rate 115200 8n1
Output: The board is controlled and responsive to serial terminal commands
root@imx8mq-voipac:~# uname -a Linux imx8mq-voipac 5.4.147-imx-5.4.24-2.1.0+ga9d96bff565a #1 SMP PREEMPT Thu Sep 16 20:18:09 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux
UART serial console
Serial console is utilized via USB Micro-B connector by default. Alternatively, the communication can be established using UART headers and TTL-232R-3V3 - FTDI cable.
NOTE:Describe jumpers position
Note:Usage of UART2 CONSOLE to communicate by default requires changes in Yocto binaries and new compilation of image files.
SD card
NOTE: Perform read/write performance test
root@imx8mq-voipac:~# fdisk -l Disk /dev/mmcblk0: 15 GB, 15758000128 bytes, 30777344 sectors 240448 cylinders, 4 heads, 32 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/mmcblk0p1 * 128,0,1 1023,3,32 16384 186775 170392 83.1M c Win95 FAT32 (LBA) /dev/mmcblk0p2 1023,3,32 1023,3,32 196608 1030993 834386 407M 83 Linux Disk /dev/mmcblk1: 14 GB, 15485370368 bytes, 30244864 sectors 236288 cylinders, 4 heads, 32 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/mmcblk1p1 * 128,0,1 1023,3,32 16384 186775 170392 83.1M c Win95 FAT32 (LBA) /dev/mmcblk1p2 1023,3,32 1023,3,32 196608 1030993 834386 407M 83 Linux Disk /dev/sda: 14 GB, 15376318464 bytes, 30031872 sectors 1869 cylinders, 255 heads, 63 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/sda1 0,0,33 1023,254,63 32 30031871 30031840 14.3G c Win95 FAT32 (LBA) root@imx8mq-voipac:~#
HDMI Output
Input: Connect LCD monitor to the development kit
Output: Desktop UI is displayed correctly
DisplayPort Output
NOTE: A different boot file image and/or device tree is required!
Input: Connect LCD monitor with DisplayPort to the development kit
Output: Desktop UI is displayed correctly
JTAG
To verify that i.MX8M CPU JTAG is functional, following command identifies and connects to the CPU's debug point:
J-Link> jtagid
Real Time Clock (RTC)
root@imx8mq-voipac:~# timedatectl
Local time: Tue 2020-05-05 18:37:26 UTC
Universal time: Tue 2020-05-05 18:37:26 UTC
RTC time: Thu 1970-01-01 00:10:56
Time zone: UTC (UTC, +0000)
System clock synchronized: no
NTP service: active
RTC in local TZ: no
root@imx8mq-voipac:~# i2cdetect -r -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- UU -- -- -- UU -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- UU -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- UU -- UU -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@imx8mq-voipac:~# dmesg | grep rtc
[ 1.562666] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0
[ 2.289791] rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
[ 2.297832] rtc-pcf8563 1-0051: registered as rtc1
[ 2.392900] [drm] Cannot find any crtc or sizes
[ 2.400347] [drm] Cannot find any crtc or sizes
[ 2.401383] [drm] Cannot find any crtc or sizes
[ 3.053517] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:09:04 UTC (544)
[ 60.247133] rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
root@imx8mq-voipac:~# date -s "2023-1-24 18:37:05"
Tue Jan 24 18:37:05 UTC 2023
root@imx8mq-voipac:~# timedatectl
Local time: Tue 2023-01-24 18:37:09 UTC
Universal time: Tue 2023-01-24 18:37:09 UTC
RTC time: Thu 1970-01-01 00:11:24
Time zone: UTC (UTC, +0000)
System clock synchronized: no
NTP service: active
RTC in local TZ: no
root@imx8mq-voipac:~# grep pcf8563 /proc/interrupts
140: 0 0 0 0 gpio-mxc 5 Level rtc-pcf8563
root@imx8mq-voipac:~# echo +2 > /sys/class/rtc/rtc1/wakealarm
[ 154.338851] rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
sh: write error: Invalid argument
root@imx8mq-voipac:~# grep pcf8563 /proc/interrupts
140: 0 0 0 0 gpio-mxc 5 Level rtc-pcf8563
SPI Flash Memory
Input: Trigger M25P80 flash detection
Output: SPI Flash sst25vf032b is detected
root@imx6-openrexultra:~# echo -n "spi2.1" > /sys/bus/spi/drivers/m25p80/unbind root@imx6-openrexultra:~# echo -n "spi2.1" > /sys/bus/spi/drivers/m25p80/bind m25p80 spi2.1: found sst26vf032b, expected m25p32 m25p80 spi2.1: sst26vf032b (4096 Kbytes)
Input: Write and read data from M25P80 flash memory
Output: If successful, console text 'Data are the same' should appear
root@imx6-openrexultra:~# echo -n "0123" > mtd_in root@imx6-openrexultra:~# mtd_debug write /dev/mtd0 0 4 mtd_in Copied 4 bytes from mtd_in to address 0x00000000 in flash root@imx6-openrexultra:~# mtd_debug read /dev/mtd0 0 4 mtd_out Copied 4 bytes from address 0x00000000 in flash to mtd_out root@imx6-openrexultra:~# diff mtd_in mtd_out && echo "Data are the same" Data are the same
NOTE: Choose which code to keep!
root@imx8mq-voipac:~# chmod +x devmem2
root@imx8mq-voipac:~# .devmem2
-sh: .devmem2: not found
root@imx8mq-voipac:~# ./devmem2
Usage: ./devmem2 { address } [ type [ data ] ]
address : memory address to act upon
type : access operation type : [b]yte, [h]alfword, [w]ord
data : data to be written
root@imx8mq-voipac:~# ./devmem2 0x30340008 w
/dev/mem opened.
Memory mapped at address 0xffff90879000.
Value at address 0x30340008 (0xffff90879008): 0x0
root@imx8mq-voipac:~# ./devmem2 0x30340014 w
/dev/mem opened.[ 565.553857] audit: type=1701 audit(1660073163.857:3): auid=42 94967295 uid=0 gid=0 ses=4294967295 pid=389 comm="devmem2" exe="/home/root/devme m2" sig=7 res=1
Memory mapped at address 0xffff97f2c000.
Bus error
root@imx8mq-voipac:~# ./devmem2 0x3033018 w
/dev/mem opened.[ 791.295664] audit: type=1701 audit(1660073389.596:4): auid=42 94967295 uid=0 gid=0 ses=4294967295 pid=391 comm="devmem2" exe="/home/root/devme m2" sig=7 res=1
Memory mapped at address 0xffffa6ec6000.
Bus error
Power button
Input: Press the POWER button
Output: The board will shutdown. By pressing longer again, the board starts booting.
[ OK ] Stopped target Sound Card.
[ OK ] Stopped target System Time Synchronized.
[ OK ] Stopped target System Time Set.
[ OK ] Stopped target Timers.
[ OK ] Stopped Daily Cleanup of Temporary Directories.
Stopping Save/Restore Sound Card State...
Stopping Kernel Logging Service...
Stopping System Logging Service...
Stopping Getty on tty1...
Stopping Serial Getty on ttymxc0...
Stopping Hostname Service...
Stopping Load/Save Random Seed...
[ OK ] Stopped Kernel Logging Service.
[ OK ] Stopped System Logging Service.
[ OK ] Stopped Getty on tty1.
[ OK ] Stopped Serial Getty on ttymxc0.
[ OK ] Stopped Hostname Service.
[ OK ] Stopped Save/Restore Sound Card State.
[ OK ] Stopped Load/Save Random Seed.
[ OK ] Stopped Session c1 of user root.
[ OK ] Removed slice system-getty.slice.
[ OK ] Removed slice system-serial\x2dgetty.slice.
Stopping Login Service...
Stopping User Manager for UID 0...
[ OK ] Stopped User Manager for UID 0.
Stopping User Runtime Directory /run/user/0...
[ OK ] Unmounted /run/user/0.
[ OK ] Stopped User Runtime Directory /run/user/0.
[ OK ] Removed slice User Slice of UID 0.
Stopping D-Bus System Message Bus...
Stopping Permit User Sessions...
[ OK ] Stopped D-Bus System Message Bus.
[ OK ] Stopped Login Service.
[ OK ] Stopped Permit User Sessions.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Network.
[ OK ] Stopped target Paths.
[ OK ] Stopped Dispatch Password ��…ts to Console Directory Watch.
[ OK ] Stopped Forward Password R��…uests to Wall Directory Watch.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Slices.
[ OK ] Removed slice User and Session Slice.
[ OK ] Stopped target Sockets.
[ OK ] Closed D-Bus System Message Bus Socket.
[ OK ] Closed dropbear.socket.
[ OK ] Stopped target System Initialization.
[ OK ] Closed Syslog Socket.
Stopping Network Name Resolution...
Stopping Network Time Synchronization...
[ OK ] Stopped Network Name Resolution.
[ OK ] Stopped Network Time Synchronization.
Stopping Network Service...
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped target Local File Systems.
Unmounting Temporary Directory (/tmp)...
Unmounting /var/volatile...
[ OK ] Stopped Network Service.
[ OK ] Unmounted Temporary Directory (/tmp).
[ OK ] Unmounted /var/volatile.
[ OK ] Stopped target Local File Systems (Pre).
[ OK ] Stopped target Swap.
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Stopped Remount Root and Kernel File Systems.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped Load Kernel Modules.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Reached target Shutdown.
[ OK ] Reached target Final Step.
[ OK ] Started Power-Off.
[ OK ] Reached target Power-Off.
[ 15.911216] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 15.920832] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 15.936588] systemd-journald[247]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 15.959340] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 15.975454] systemd-shutdown[1]: Unmounting file systems.
[ 15.982656] [353]: Remounting '/' read-only in with options '(null)'.
[ 16.020576] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 16.031646] systemd-shutdown[1]: All filesystems unmounted.
[ 16.037301] systemd-shutdown[1]: Deactivating swaps.
[ 16.042421] systemd-shutdown[1]: All swaps deactivated.
[ 16.047678] systemd-shutdown[1]: Detaching loop devices.
[ 16.055830] systemd-shutdown[1]: All loop devices detached.
[ 16.061424] systemd-shutdown[1]: Detaching DM devices.
[ 16.066794] systemd-shutdown[1]: All DM devices detached.
[ 16.072226] systemd-shutdown[1]: All filesystems, swaps, loop devices and DM devices detached.
[ 16.086744] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 16.093483] systemd-shutdown[1]: Powering off.
[ 16.097961] kvm: exiting hardware virtualization
[ 16.097991] imx-sdma 30bd0000.sdma: external firmware not found, using ROM firmware
[ 16.098546] cfg80211: failed to load regulatory.db
[ 16.101341] imx-sdma 302c0000.sdma: loaded firmware 4.5
[ 16.166426] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex...
[ 16.173169] mwifiex_pcie 0000:01:00.0: PREP_CMD: card is removed
[ 16.240963] mwifiex_pcie 0000:01:00.0: performing cancel_work_sync()...
[ 16.247595] mwifiex_pcie 0000:01:00.0: cancel_work_sync() done
[ 16.288309] reboot: Power down
Then pressing POWER button again:
U-Boot 2020.04-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (May 30 2020 - 06:50:01 +0000) CPU: i.MX8MQLite rev2.1 1300 MHz (running at 800 MHz) CPU: Industrial temperature grade (-40C to 105C) at 62C Reset cause: POR Model: Voipac i.MX8MQ EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK [*]-Video Link 0imx8m_hdmi_probe ....
Reset button
Input: Press the RESET button
Output: The board will execute bootloader immediately with "Reset cause: POR"
Note: iMX8M Industrial Development Kit should never freeze or hang after the reset button was pressed. Testing the operation 10 times gives a reliable result
U-Boot 2020.04-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (May 30 2020 - 06:50:01 +0000) CPU: i.MX8MQLite rev2.1 1300 MHz (running at 800 MHz) CPU: Industrial temperature grade (-40C to 105C) at 62C Reset cause: POR Model: Voipac i.MX8MQ EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK [*]-Video Link 0imx8m_hdmi_probe ....
User buttons
Input: Press Enter/Left/Right/Up/Down buttons
Output: Button events 1 and 0 are generated
root@imx8mq-voipac:~# evtest /dev/input/by-path/platform-gpio-buttons-event
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "gpio-buttons"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 28 (KEY_ENTER)
Event code 103 (KEY_UP)
Event code 105 (KEY_LEFT)
Event code 106 (KEY_RIGHT)
Event code 108 (KEY_DOWN)
Properties:
Testing ... (interrupt to exit)
User LED
Input: None
Output: Script switches User LED on baseboard ON and OFF in one second intervals
root@imx8mq-voipac:~#
for LED in /sys/class/leds/user
do
echo Testing ${LED}
echo -n "1" > ${LED}/brightness
sleep 1
echo -n "0" > ${LED}/brightness
sleep 1
done
Input: None
Output: User LED on baseboard is set to heartbeat blinking sequence
root@imx8mq-voipac:~# echo heartbeat > /sys/class/leds/user/trigger
Input: None
Output: User LED on SOM is set to heartbeat blinking sequence
root@imx8mq-voipac:~# echo heartbeat > /sys/class/leds/user-som/trigger