Difference between revisions of "iMX8M Industrial Flashing Procedure"

From Voipac Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
<!-- -->
 
<!-- -->
 
<div style="float:right">__TOC__</div>
 
<div style="float:right">__TOC__</div>
This page describes how to flash iMX8M Industial Module binaries into eMMC Flash memory and SD card.
+
This page describes how to flash iMX8M Industial Module binaries into eMMC Flash memory or SD card.
  
 
== Installing uuu (Universal Upload Utility) ===
 
== Installing uuu (Universal Upload Utility) ===

Revision as of 14:48, 23 January 2023

This page describes how to flash iMX8M Industial Module binaries into eMMC Flash memory or SD card.

Installing uuu (Universal Upload Utility) =

Linux

git clone ssh://git@github.com/NXPmicro/mfgtools.git
cd mfgtools
mkdir .build && cd .build && cmake .. && make -j`nproc`

In .build/uuu directory there is binary called uuu which is used for flashing

Windows

  1. Go to https://github.com/NXPmicro/mfgtools/releases
  2. Have look for last release. Example: Releases/uuu_1.4.182 https://github.com/NXPmicro/mfgtools/releases/tag/uuu_1.4.182
  3. Download uuu.exe
  4. Save it to C:\uuu

Flashing procedure

For flashing eMMC or SD card we need to perform several steps:

  1. change switch position S1 BOOT to: 1-off, 2-on (serial downloader mode)
  2. plug USB-C cable to PC and to board USB C connector
  3. prepare imx-boot and *.wic files
  4. run following commands for flashing media

eMMC

Linux

sudo ./uuu -b emmc_all <path to imx-boot file> <path to wic file>

Windows

C:\uuu>uuu.exe -b emmc_all <path to imx-boot file> <path to wic file>

SD

Linux

sudo ./uuu -b sd_all <path to imx-boot file> <path to wic file>

Windows

C:\uuu>uuu.exe -b sd_all <path to imx-boot file> <path to wic file>

After those steps eMMC or SD card is flashed and perform following steps to boot new image:

  1. unplug USB-C cable from PC
  2. change switch position S1 BOOT to: 1-on, 2-off (boot mode)
  3. be sure that S2 BOOT and S3 BOOT switches are in proper position to boot from desired peripherals (eMMC or SD)
  4. connect debug UART and power on board and messages should appear on serial console

400px