Difference between revisions of "iMX6 TinyRex Controlling the Development Kit"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
This page guides though the first steps of controlling and operating the development kit. To prepare the working setup [[iMX6_TinyRex_Connecting_the_Components_and_Cables|connect and plug in cables]] first. | This page guides though the first steps of controlling and operating the development kit. To prepare the working setup [[iMX6_TinyRex_Connecting_the_Components_and_Cables|connect and plug in cables]] first. | ||
== Controlling the Development Kit over Serial Line == | == Controlling the Development Kit over Serial Line == | ||
| − | + | ||
| − | |||
''''' Recommended HW: ''''' | ''''' Recommended HW: ''''' | ||
* PC with USB port | * PC with USB port | ||
* Voipac iMX6 TinyRex Development Kit | * Voipac iMX6 TinyRex Development Kit | ||
* [http://www.voipac.com/#iMX6-TTL-00000000 TTL-232R-3V3 ( FTDI ) cable] | * [http://www.voipac.com/#iMX6-TTL-00000000 TTL-232R-3V3 ( FTDI ) cable] | ||
| − | + | <br /> | |
''''' Recommended SW: ''''' | ''''' Recommended SW: ''''' | ||
* Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...) | * Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...) | ||
<br /> | <br /> | ||
| − | |||
| − | |||
| − | |||
| − | |||
''''' Default serial port settings: ''''' | ''''' Default serial port settings: ''''' | ||
* Speed (baud): 115200 | * Speed (baud): 115200 | ||
| Line 24: | Line 19: | ||
* Parity: None | * Parity: None | ||
* Flow control: None | * Flow control: None | ||
| − | + | <br /> | |
Controlling the development kit using TeraTerm:<br /> | Controlling the development kit using TeraTerm:<br /> | ||
[[image:iMX6_TinyRex_Development_kit-TeraTerm.jpg|600px]] | [[image:iMX6_TinyRex_Development_kit-TeraTerm.jpg|600px]] | ||
Revision as of 09:48, 10 March 2021
This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.
Controlling the Development Kit over Serial Line
Recommended HW:
- PC with USB port
- Voipac iMX6 TinyRex Development Kit
- TTL-232R-3V3 ( FTDI ) cable
Recommended SW:
- Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)
Default serial port settings:
- Speed (baud): 115200
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow control: None
Controlling the development kit using TeraTerm:
600px
Using External Monitor and USB Keyboard
|
Recommended HW:
|
Controlling the development kit using external monitor and USB keyboard:
600px
