i.MX25 SODIMM PC Toolchain

In this section suitable GNUEABI toolchains to help build images for i.MX25 SODIMM PC - Development kit are shown.

Default toolchain

This toolchain is recommended to use.

Install

sudo apt-get install gcc-arm-linux-gnueabi lzop

fslc-framebuffer toolchain

Install

mkdir -pv ~/workdir/downloads
cd ~/workdir/downloads
wget -c http://downloads.voipac.com/files/i.MX25_SODIMM_PC-Development_kit/module/software/toolchain/binaries/fslc-framebuffer-glibc-x86_64-meta-toolchain-armv5e-toolchain-2.4.3.sh
chmod a+x fslc-framebuffer-glibc-x86_64-meta-toolchain-armv5e-toolchain-2.4.3.sh
./fslc-framebuffer-glibc-x86_64-meta-toolchain-armv5e-toolchain-2.4.3.sh

Install log

user@workstation:~/workdir/downloads$ ./fslc-framebuffer-glibc-x86_64-meta-toolchain-armv5e-toolchain-2.4.3.sh
FSLC FrameBuffer SDK installer version 2.4.3
============================================
Enter target directory for SDK (default: /opt/fslc-framebuffer/2.4.3): 
You are about to install the SDK to "/opt/fslc-framebuffer/2.4.3". Proceed[Y/n]? 
[sudo] password for marek: 
Extracting SDK.......................done
Setting it up...done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
 $ . /opt/fslc-framebuffer/2.4.3/environment-setup-armv5e-fslc-linux-gnueabi

Setup

source /opt/fslc-framebuffer/2.4.3/environment-setup-armv5e-fslc-linux-gnueabi