Difference between revisions of "i.MX53 SODIMM PC Controlling the Development Kit"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
This page guides though the first steps of controlling and operating the development kit. To prepare the working setup [[i.MX53 SODIMM PC Connecting the Components and Cables|connect and plug in cables]] first. | This page guides though the first steps of controlling and operating the development kit. To prepare the working setup [[i.MX53 SODIMM PC Connecting the Components and Cables|connect and plug in cables]] first. | ||
<br /><br /> | <br /><br /> | ||
| − | The development kit is supplied with | + | The development kit is supplied with preinstalled bootloader, Linux kernel and demo filesystem. Several ways of controlling boards are available: |
== Controlling the Development Kit over Serial Line == | == Controlling the Development Kit over Serial Line == | ||
| Line 33: | Line 33: | ||
* multiple video devices are supported: | * multiple video devices are supported: | ||
** external monitor with DVI or VGA connector (DVI to VGA adapter is required in case of VGA monitor usage) | ** external monitor with DVI or VGA connector (DVI to VGA adapter is required in case of VGA monitor usage) | ||
| − | ** [[TFT Display Data Image|TFT Display Data Image]] | + | ** [[TFT Display Data Image Set|TFT Display Data Image display]] |
| − | ** [[TFT Display Optrex|TFT Display Optrex]] | + | ** [[TFT Display Optrex Set|TFT Display Optrex display]] |
| − | ** [[TFT Display EDT | + | ** [[TFT Display EDT Set|TFT Display EDT display]] |
* USB keyboard | * USB keyboard | ||
<br /> | <br /> | ||
| Line 56: | Line 56: | ||
<br /> | <br /> | ||
''''' Important notes: ''''' | ''''' Important notes: ''''' | ||
| − | * | + | * Modules are shipped with empty root password |
| − | * | + | * IP address is dynamic by default and setup by the DHCP server upon boot |
| − | * SSH, SFTP services require root password to be set up ( | + | * SSH, SFTP services require root password to be set up (using '''passwd''' command) |
| − | * FTP, SFTP are recommended only for data | + | * FTP, SFTP are recommended only for data transfer (binary mode selection is advised) |
<br /> | <br /> | ||
Controlling the development kit using PUTTY SSH client:<br /> | Controlling the development kit using PUTTY SSH client:<br /> | ||
Revision as of 21:13, 12 April 2021
This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.
The development kit is supplied with preinstalled bootloader, Linux kernel and demo filesystem. Several ways of controlling boards are available:
Controlling the Development Kit over Serial Line
Recommended HW:
- PC with serial port or USB to serial adapter
- Voipac i.MX53 SODIMM PC - Development kit
- Voipac serial cable
Recommended SW:
- Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)
Default serial port settings:
- Speed (baud): 115200
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow control: None
Controlling the development kit using TeraTerm:
600px
Using External Monitor and USB Keyboard
Recommended HW:
- Voipac i.MX53 SODIMM PC - Development kit
- multiple video devices are supported:
- external monitor with DVI or VGA connector (DVI to VGA adapter is required in case of VGA monitor usage)
- TFT Display Data Image display
- TFT Display Optrex display
- TFT Display EDT display
- USB keyboard
Important: External monitor must support at least one of the following resolutions: 640x480px, 800x480px, 800x600px, 1024x720px, 1280x800px or 1600x1200px.
Controlling the development kit using external monitor and USB keyboard:
600px
Controlling the Development Kit over Ethernet
Recommended HW:
- PC with Ethernet
- Voipac i.MX53 SODIMM PC - Development kit
- Ethernet cable
Recommended SW:
- Telnet client (Telnet, PUTTY, …)
- SSH client (SSH,PUTTY, …)
- FTP client (FTP, Filezilla, BareFTP, …)
- SFTP client (Filezilla, PUTTY, WinSCP, …)
Important notes:
- Modules are shipped with empty root password
- IP address is dynamic by default and setup by the DHCP server upon boot
- SSH, SFTP services require root password to be set up (using passwd command)
- FTP, SFTP are recommended only for data transfer (binary mode selection is advised)
Controlling the development kit using PUTTY SSH client:
600px
Controlling the development kit using WinSCP (Explorer Interface):
600px
