Difference between revisions of "TFT Optrex Display Set"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
* Optrex TFT display adapter is plugged into the Base Board H200 male header. Make sure pin number 1 is positioned correctly. | * Optrex TFT display adapter is plugged into the Base Board H200 male header. Make sure pin number 1 is positioned correctly. | ||
* A flexible flat cable is used for video connection between the adapter CN1 connector and the display | * A flexible flat cable is used for video connection between the adapter CN1 connector and the display | ||
| − | * Touch screen feature is established by plugging additional four signal FFC cable into CN2 connector | + | * Touch screen feature is established by plugging additional four signal FFC cable into CN2 connector. Extra care while plugging is important as this cable is shorter then the one used for the video interface. |
[[image:i.MX25_SODIMM_Base_Board-TFT_Optrex_display_adapter-Display_connection.jpg|800px]] | [[image:i.MX25_SODIMM_Base_Board-TFT_Optrex_display_adapter-Display_connection.jpg|800px]] | ||
Revision as of 09:03, 12 April 2021
This section shows information about Optrex TFT display. This display with resistive touch screen is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development kits. It is supported in OS Linux, OS Android and OS WinCE 6.0.
The display datasheet can be downloaded from here.
Hardware connection
To make the physical connection between the board and the display easier, Optrex TFT display adapter was designed to connect the set together.
To implement the display capabilities, following connections need to be made:
- Optrex TFT display adapter is plugged into the Base Board H200 male header. Make sure pin number 1 is positioned correctly.
- A flexible flat cable is used for video connection between the adapter CN1 connector and the display
- Touch screen feature is established by plugging additional four signal FFC cable into CN2 connector. Extra care while plugging is important as this cable is shorter then the one used for the video interface.
