Difference between revisions of "TFT EDT Display Set"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
[[Category:i.MX25 SODIMM PC - Development kit]] | [[Category:i.MX25 SODIMM PC - Development kit]] | ||
<!-- --> | <!-- --> | ||
| − | |||
| − | |||
This section shows information about TFT Display EDT set. This multitouch capacitive display is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development kits. The display is supported in OS Linux, Android and Qt4e. | This section shows information about TFT Display EDT set. This multitouch capacitive display is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development kits. The display is supported in OS Linux, Android and Qt4e. | ||
<br /><br /> | <br /><br /> | ||
Revision as of 15:47, 7 April 2021
This section shows information about TFT Display EDT set. This multitouch capacitive display is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development kits. The display is supported in OS Linux, Android and Qt4e.
The display datasheet can be downloaded from here.
Hardware connection
To make the physiucal connection between the board and the display easier, TFT EDT display adapter was designed to connect the set together.
To implement the display capabilities, following connections need to be made:
- TFT EDT display adapter is plugged into the Base Board H200
- Additional signals required between adapter H2 header and H501 on the Base Board are established using a 4-wire connection
- All the connections between the TFT EDT display adapter and the display are established using a flexible flat cable
