Difference between revisions of "iMX6 TinyRex Memory Calibration"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
== Description == | == Description == | ||
Memory calibration procedure consists from following steps: | Memory calibration procedure consists from following steps: | ||
| − | * Short BOOT_MODE jumper on | + | * Short BOOT_MODE jumper on i.MX6 TinyRex Base Board |
* Connect USB_OTG port to host PC utilizing microUSB-USB cable | * Connect USB_OTG port to host PC utilizing microUSB-USB cable | ||
* Power on i.MX6 TinyRex Development kit | * Power on i.MX6 TinyRex Development kit | ||
| Line 15: | Line 15: | ||
* Configure DDR Stress Tester and calibrate memory | * Configure DDR Stress Tester and calibrate memory | ||
* Remove BOOT_MODE jumper | * Remove BOOT_MODE jumper | ||
| − | * Power off | + | * Power off i.MX6 TinyRex Development kit |
== Requirements == | == Requirements == | ||
* micro USB cable | * micro USB cable | ||
* 5V 2A Power supply | * 5V 2A Power supply | ||
| − | * | + | * iMX6 TinyRex Module and Base Board |
* PC controlling the test | * PC controlling the test | ||
* [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/tools&dl=DDR_Stress_Tester_V1.0.3_Imx6TinyRex.zip DDR Stress Tester 1.0.3] application | * [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/tools&dl=DDR_Stress_Tester_V1.0.3_Imx6TinyRex.zip DDR Stress Tester 1.0.3] application | ||
Revision as of 10:18, 15 March 2021
Disclaimer of caution
This procedure is intended for manufacturing use only and should be never applied for shipped iMX6 TinyRex Modules.
Description
Memory calibration procedure consists from following steps:
- Short BOOT_MODE jumper on i.MX6 TinyRex Base Board
- Connect USB_OTG port to host PC utilizing microUSB-USB cable
- Power on i.MX6 TinyRex Development kit
- Execute DDR Stress Tester at host PC using command line
- Configure DDR Stress Tester and calibrate memory
- Remove BOOT_MODE jumper
- Power off i.MX6 TinyRex Development kit
Requirements
- micro USB cable
- 5V 2A Power supply
- iMX6 TinyRex Module and Base Board
- PC controlling the test
- DDR Stress Tester 1.0.3 application
- DDR Stress Tester 2.52 application
Calibration
Stress tester v2.52 (Ultra)
- 4GB RAM - DDR_Stress_Tester_V2.52_Imx6Rex/script/voipac/imx6qp_tinyrex_ultra_MT41K512M16HA-125.inc
- 2GB RAM - DDR_Stress_Tester_V2.52_Imx6Rex/script/voipac/imx6qp_tinyrex_ultra_MT41K256M16HA-125.inc
Stress tester v1.0.3 (Max, Pro, Basic, Lite)
DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6s_tinyrex_MT41J64M16JT-15E.inc DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6s_tinyrex_MT41K128M16JT-125.inc DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6d_tinyrex_MT41K128M16JT-125.inc DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6q_tinyrex_MT41K256M16HA-125.inc
