iMX8M Industrial Yocto Image Building

This Wiki page guides through the process of downloading the Yocto Project source files for release 3.1 (dunfell), preparing and building images for the iMX8M Industrial Development Kit.

Before images can be built, necessary steps need to be performed to setup the host machine.

All the source files for this customized Yocto Project, together with the recent changes made, can be inspected and downloaded at the Voipac GitHub repository.

Cloning the project

Create a new directory for the project environment:

mkdir ~/voipac-yocto
cd ~/voipac-yocto

Clone the iMX8M Industrial Yocto Project into the host machine:

git clone https://github.com/voipac/yocto-imx8m-voipac.git

Building the image

Voipac provides quick and simple-to-use option how to build an image by using prepared script:

#!/bin/bash

set -e

# Copy manifests helper function
copy_manifests() {
rm -rf .repo
mkdir -p .repo/manifests
cp scripts/voipac.xml .repo/manifests/
}

# Fetch the latest meta layers
if ! diff -q .repo/manifests/voipac.xml scripts/voipac.xml >/dev/null 2>&1; then
        copy_manifests
        repo init -u "$(pwd)"/.repo/repo -b default -m voipac.xml
fi
       
repo sync --optimized-fetch

MACHINE=imx8mq-voipac DISTRO=fslc-xwayland source ./setup-environment build-voipac
bitbake -f voipac-image

The script automatically updates the latest meta layers. These layers include manifest files describing where all the sources are located. Afterwards all the directories are synchronized.

The second to last command defines the machine for which the last command bitbake compiles and builds output binaries. Besides describing the specifics for iMX8M Industrial Development Kit, DISTRO provides several building options selecting graphical interface:

• fsl-imx-wayland: Wayland weston graphics
• fsl-imx-xwayland: Wayland graphics and X11
• fsl-imx-fb: framebuffer graphics (no Wayland or X11)

The script can be run to fetch and build the Yocto images by simply calling its filename:

./build_image.sh

Note: Make sure that synchronization finished with no errors showcasing it with the following massage:

repo sync has finished successfully.

Note: The first successful build can take several hours (depending on multiple factors affecting the host machine like CPU, internet bandwidth, allocated disk space, etc.).

Locating output files

After the compiling process was completed, the freshly built output files are located in directory:

cd ~/voipac-yocto/yocto-imx8m-voipac/build-voipac/tmp/deploy/images

The files which need to be flashed into the development kit are located in this directory. To make them more accessible, the files can be copied and unpacked:

cp -prv imx-boot ~/
cp -prv voipac-image-imx8mq-voipac-20230512212054.rootfs.wic.gz ~/voipac-image-imx8mq-voipac.wic.gz
gzip -d ~/voipac-image-imx8mq-voipac.wic.gz

Flashing the binaries

At this point everything was prepared to flash the binaries. Follow the flashing procedure instructions to start the development kit with the compiled binaries.