Difference between revisions of "iMX8M Industrial Flashing Procedure"
Jump to navigation
Jump to search
| Line 62: | Line 62: | ||
[[File:iMX8M_Industrial_Development_Kit-Boot_mode.png|400px]]<br /><br /> | [[File:iMX8M_Industrial_Development_Kit-Boot_mode.png|400px]]<br /><br /> | ||
| − | * Make sure that S2 BOOT and S3 BOOT DIP switches are in correct positions in order to boot from the preferred storage media (eMMC Flash memory or SD Card) | + | * Make sure that S2 BOOT and S3 BOOT DIP switches are in correct positions in order to boot from the preferred storage media (eMMC Flash memory or SD Card): |
| − | === eMMC Flash Memory (default) === | + | ==== eMMC Flash Memory (default) ==== |
[[File:iMX8M_Industrial_Development_Kit-eMMC_boot_DIP_switch_configuration.png|400px]]<br /><br /> | [[File:iMX8M_Industrial_Development_Kit-eMMC_boot_DIP_switch_configuration.png|400px]]<br /><br /> | ||
| − | === SD Card === | + | ==== SD Card ==== |
[[File:iMX8M_Industrial_Development_Kit-SD_boot_DIP_switch_configuration.png|400px]]<br /><br /> | [[File:iMX8M_Industrial_Development_Kit-SD_boot_DIP_switch_configuration.png|400px]]<br /><br /> | ||
* connect debug UART and power on board and messages should appear on serial console | * connect debug UART and power on board and messages should appear on serial console | ||
Revision as of 16:41, 23 January 2023
This page describes how to flash binaries into iMX8M Industial Module's eMMC Flash memory or SD card.
Installing Universal Upload Utility (UUU)
Linux
git clone ssh://git@github.com/NXPmicro/mfgtools.git cd mfgtools mkdir .build && cd .build && cmake .. && make -j`nproc`
The binary called uuu, which is used for flashing, is located in .build/uuu directory.
Windows
- Go to: https://github.com/NXPmicro/mfgtools/releases
- Select the latest stable release.
Example: Releases/uuu_1.4.243: https://github.com/NXPmicro/mfgtools/releases/tag/uuu_1.4.243 - Download: uuu.exe
- Save the file into: C:\uuu
Preparing the binaries
- Download the default bootloader file: imx-boot
- Download the default WIC filesystem image: voipac-image-imx8mq-voipac.wic
Flashing procedure
- Set serial downloader mode by sliding DIP switch S1 BOOT positions to: 1-OFF, 2-ON
- Plug USB Micro-B cable to baseboard CONSOLE connector and PC
- Plug USB-C cable to baseboard USB-C connector and PC
Note: Powering of the development kit is not required during the flashing procedure. - Download and copy imx-boot and *.wic files into uuu\ directory
- Choose one of the following commands to start the flashing process:
eMMC Flash Memory (default)
Linux
sudo ./uuu -b emmc_all imx-boot voipac-image-imx8mq-voipac.wic
Windows
uuu.exe -b emmc_all imx-boot voipac-image-imx8mq-voipac.wic
SD Card
Linux
sudo ./uuu -b sd_all imx-boot voipac-image-imx8mq-voipac.wic
Windows
C:\uuu>uuu.exe -b sd_all imx-boot voipac-image-imx8mq-voipac.wic
Running the newly flashed binaries
After completing the above steps, eMMC Flash memory or SD Card is flashed and the following steps are to be performed to boot the new image:
- Unplug USB-C cable from PC
- Set Boot mode by sliding DIP switch S1 BOOT positions to: 1-ON, 2-OFF
- Make sure that S2 BOOT and S3 BOOT DIP switches are in correct positions in order to boot from the preferred storage media (eMMC Flash memory or SD Card):
eMMC Flash Memory (default)
SD Card
- connect debug UART and power on board and messages should appear on serial console