Difference between revisions of "iMX6 TinyRex Controlling the Development Kit"

From Voipac Wiki
Jump to navigation Jump to search
Line 25: Line 25:
 
* Flow control: None
 
* Flow control: None
 
|}
 
|}
−
Controlling the development kit using TeraTerm:
+
Controlling the development kit using TeraTerm:<br />
 
[[image:iMX6_TinyRex_Development_kit-TeraTerm.jpg|800px]]
 
[[image:iMX6_TinyRex_Development_kit-TeraTerm.jpg|800px]]

Revision as of 09:28, 10 March 2021

This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.

Controlling the Development Kit over Serial Line

Recommended HW:

Recommended SW:

  • Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)



Default serial port settings:

  • Speed (baud): 115200
  • Data bits: 8
  • Stop bits: 1
  • Parity: None
  • Flow control: None

Controlling the development kit using TeraTerm:
800px

Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Controlling_the_Development_Kit&oldid=308"