Difference between revisions of "iMX6 TinyRex Lite Controlling the Development Kit"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
* PC with USB port | * PC with USB port | ||
* Voipac iMX6 TinyRex Development Kit | * Voipac iMX6 TinyRex Development Kit | ||
| − | * [ | + | * [https://voipac.demo.activit.sk/ttl-232r-3v3-cable TTL-232R-3V3 ( FTDI ) cable] |
''''' Recommended SW: ''''' | ''''' Recommended SW: ''''' | ||
Revision as of 09:15, 25 October 2021
This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.
Controlling the Development Kit over Serial Line
Recommended HW:
- PC with USB port
- Voipac iMX6 TinyRex Development Kit
- TTL-232R-3V3 ( FTDI ) cable
Recommended SW:
- Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)
Default serial port settings:
- Speed (baud): 115200
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow control: None
Controlling the development kit using TeraTerm:
580px
Using External Monitor and USB Keyboard
Recommended HW:
- External monitor with HDMI connector (HDMI to VGA adapter is required for VGA monitor)
- Voipac iMX6 TinyRex Development Kit
- HDMI High Speed cable
- USB keyboard and USB mouse
Controlling the development kit using external monitor and USB keyboard:
580px
