Difference between revisions of "iMX6 TinyRex Controlling the Development Kit"

From Voipac Wiki
Jump to navigation Jump to search
Line 9: Line 9:
 
* PC with USB port
 
* PC with USB port
 
* Voipac iMX6 TinyRex Development Kit
 
* Voipac iMX6 TinyRex Development Kit
−
* [http://www.voipac.com/#iMX6-TTL-00000000|TTL-232R-3V3 ( FTDI )] cable
+
* [http://www.voipac.com/#iMX6-TTL-00000000 TTL-232R-3V3 ( FTDI )] cable
 
|
 
|
 
''''' Recommended SW: '''''
 
''''' Recommended SW: '''''

Revision as of 09:18, 10 March 2021

This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.

Controlling the Development Kit over Serial Line

Recommended HW:

Recommended SW:

  • Serial line terminal (PUTTY, Minicom, Ckermit, Hyperterminal, TeraTerm, ...)


Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Controlling_the_Development_Kit&oldid=297"