Difference between revisions of "iMX6 TinyRex Connecting the Components and Cables"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
[[image:iMX6_TinyRex_Development_kit-Connections.jpg|800px]] | [[image:iMX6_TinyRex_Development_kit-Connections.jpg|800px]] | ||
<blockquote>'''''IMPORTANT! Be careful when connecting TTL-232R FTDI cable to the base board'''''</blockquote> | <blockquote>'''''IMPORTANT! Be careful when connecting TTL-232R FTDI cable to the base board'''''</blockquote> | ||
| + | Check if the cable conductor 1 (black wire) is connected to Pin 1 (Header connector J10 – TTL-232R FTDI) on the base board. | ||
Revision as of 08:15, 10 March 2021
Prepare base board and plug in (bootable) microSD card, TTL-232R-3V3 FTDI cable, Ethernet cable, HDMI cable and other devices or interfaces you need. Plug the power supply connector in. 800px
IMPORTANT! Be careful when connecting TTL-232R FTDI cable to the base board
Check if the cable conductor 1 (black wire) is connected to Pin 1 (Header connector J10 – TTL-232R FTDI) on the base board.