Difference between revisions of "iMX6 OpenRex Max"

Revision as of 08:32, 21 September 2021

These Wiki pages cover topics concerning OpenRex Single Board Computer built in Max version, such as the first steps with the board, accessing the peripherals or preparing custom software like Android or Yocto distributions.

Configuration


Product number	iMX6-SBC-432431111
CPU	i.MX6 Quad 1.0GHz
RAM	2GB DDR3-1066 SDRAM (533MHz)
I2C EEPROM	16Kbit
SPI Flash	32Mbit
Ethernet	10/100/1000 Mbps
SATA	supported

Documentation

Getting Started

Peripherals

Accessing and Testing Peripherals

Environmental chamber and EMC test results

Software Development

Recovery, Calibration and Production

@@ Line 7: / Line 7: @@
 {| class="toccolours" width="100%" style="text-align: left"
 |-
-| style="width: 25%;" | <br />[[image:iMX6-SBC-132111011.jpg|200px]]<br />
+| style="width: 25%;" | [[image:imx6-openrex-sbc-max.png]]<br />
-| style="width: 2%;" |
+| style="width: 75%;" |
-| style="width: 73%;" |
 {|
-|Product number:
+| <br>
-|iMX6-SBC-432431111
 |-
-|CPU:
+|style="width: 40%; padding-right: 5%; text-align:right;" | Product number || 	iMX6-SBC-432431111
-|i.MX6 Quad 1.0GHz
 |-
-|RAM:
+|style="padding-right: 5%; text-align:right;" | CPU || i.MX6 Quad 1.0GHz
-|2GB DDR3-1066 SDRAM (533MHz)
 |-
-|I2C EEPROM:
+|style="padding-right: 5%; text-align:right;" | RAM || 2GB DDR3-1066 SDRAM (533MHz)
-|16Kbit
 |-
-|SPI Flash:
+|style="padding-right: 5%; text-align:right;" | I2C EEPROM || 16Kbit
-|32Mbit
 |-
-|Ethernet:
+|style="padding-right: 5%; text-align:right;" | SPI Flash || 32Mbit
-|10/100/1000 Mbps
 |-
-|SATA:
+|style="padding-right: 5%; text-align:right;" | Ethernet || 10/100/1000 Mbps
-|supported
+|-
+|style="padding-right: 5%; text-align:right;" | SATA || supported
 |}
 |}