Difference between revisions of "iMX6 Rex Yocto"
Jump to navigation
Jump to search
| (11 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | [[Category:iMX6 Rex Development | + | [[Category:iMX6 Rex Development Kit]] |
[[Category:iMX6 Rex Ultra]] | [[Category:iMX6 Rex Ultra]] | ||
[[Category:Yocto]] | [[Category:Yocto]] | ||
<!-- --> | <!-- --> | ||
<div style="float:right">__TOC__</div> | <div style="float:right">__TOC__</div> | ||
| − | + | This Wiki section guides through preparation and compiling images using Yocto Project. | |
== Download and install repo utility == | == Download and install repo utility == | ||
| − | '''''Note: ''''' As Freescale disabled its primary git servers, the official repositories were moved. The files for building can be accessed by following [https://community.nxp.com/t5/i-MX-Processors- | + | '''''Note: ''''' As Freescale disabled its primary git servers, the official repositories were moved. The files for building can be accessed by following [https://community.nxp.com/t5/i-MX-Processors/git-freescale-com-not-working-Any-new-link/m-p/998841 this workaround].<br /><br /> |
To download the board support package, repositories need to be installed. To prepare them follow these steps: | To download the board support package, repositories need to be installed. To prepare them follow these steps: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
mkdir -pv ~/workdir/bin | mkdir -pv ~/workdir/bin | ||
| − | curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/workdir/bin/repo | + | # curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/workdir/bin/repo |
chmod a+x ~/workdir/bin/repo | chmod a+x ~/workdir/bin/repo | ||
PATH=${PATH}:~/workdir/bin | PATH=${PATH}:~/workdir/bin | ||
| Line 17: | Line 17: | ||
== Yocto Project 2.1 == | == Yocto Project 2.1 == | ||
| − | Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in [http://downloads.voipac.com/files/ | + | Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in [http://downloads.voipac.com/files/iMX6_Rex_Development_Kit/module/software/yocto/documents/i.MX_Yocto_Project-Users_Guide_21.pdf Freescale Yocto Project User's Guide]. |
| − | === | + | === Initialize Yocto Project === |
Download the BSP Yocto Project Environment: | Download the BSP Yocto Project Environment: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 48: | Line 48: | ||
=== Sync === | === Sync === | ||
| − | + | Synchronize repositories: | |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
cd ~/workdir/voipac/imx6/yocto/ | cd ~/workdir/voipac/imx6/yocto/ | ||
| Line 91: | Line 91: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | === Build | + | === Build customization === |
Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found: | Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 117: | Line 117: | ||
=== Getting the BSP === | === Getting the BSP === | ||
| − | Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in [http://downloads.voipac.com/files/ | + | Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in [http://downloads.voipac.com/files/iMX6_Rex_Development_Kit/module/software/yocto/documents/Freescale_Yocto_Project-Users_Guide_20.pdf Freescale Yocto Project User's Guide]. |
| − | === | + | === Initialize Yocto Project === |
Download the BSP Yocto Project Environment: | Download the BSP Yocto Project Environment: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 148: | Line 148: | ||
=== Sync === | === Sync === | ||
| − | + | Synchronize repositories: | |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
cd ~/workdir/voipac/imx6/yocto/ | cd ~/workdir/voipac/imx6/yocto/ | ||
| Line 189: | Line 189: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | === Build | + | === Build customization === |
Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found: | Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 210: | Line 210: | ||
== Yocto Project 1.7 == | == Yocto Project 1.7 == | ||
| − | Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in [http://downloads.voipac.com/files/ | + | Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in [http://downloads.voipac.com/files/iMX6_Rex_Development_Kit/module/software/yocto/documents/Freescale_Yocto_Project-Users_Guide_17.pdf Freescale Yocto Project User's Guide]. |
| − | === | + | === Initialize Yocto Project === |
Download the BSP Yocto Project Environment: | Download the BSP Yocto Project Environment: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 241: | Line 241: | ||
=== Sync === | === Sync === | ||
| − | + | Synchronize repositories: | |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
cd ~/workdir/voipac/imx6/yocto/ | cd ~/workdir/voipac/imx6/yocto/ | ||
| Line 276: | Line 276: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | === Build | + | === Build customization === |
Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found: | Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 297: | Line 297: | ||
== Building images == | == Building images == | ||
| + | Locate the Yocto working directory: | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
cd ~/workdir/imx6/yocto/fsl-release-bsp | cd ~/workdir/imx6/yocto/fsl-release-bsp | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | Supported machines (Production) | + | Supported machines (Production): |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
imx6-openrexbasic | imx6-openrexbasic | ||
| Line 318: | Line 319: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | Supported machines (Prototypes) | + | Supported machines (Prototypes): |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
imx6dl-rex | imx6dl-rex | ||
| Line 325: | Line 326: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | Supported distros (Freescale) | + | Supported distros (Freescale): |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
fsl-imx-x11 - Only X11 graphics | fsl-imx-x11 - Only X11 graphics | ||
| Line 334: | Line 335: | ||
=== Console image === | === Console image === | ||
| − | Setup and | + | Setup and build for Console image: |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
MACHINE=<machine name> source setup-environment build-dir | MACHINE=<machine name> source setup-environment build-dir | ||
| Line 341: | Line 342: | ||
=== Toolchain === | === Toolchain === | ||
| − | Setup and | + | Setup and build for Toolchain: |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
MACHINE=<machine name> bitbake core-image-base -c populate_sdk | MACHINE=<machine name> bitbake core-image-base -c populate_sdk | ||
| Line 347: | Line 348: | ||
=== FSL GUI image === | === FSL GUI image === | ||
| − | Setup and | + | Setup and build for FSL GUI image: |
==== Yocto 2.1 ==== | ==== Yocto 2.1 ==== | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 361: | Line 362: | ||
=== Voipac image === | === Voipac image === | ||
| − | Setup and | + | Setup and build for Voipac image: |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
MACHINE=<machine name> source setup-environment build-vpac | MACHINE=<machine name> source setup-environment build-vpac | ||
| Line 369: | Line 370: | ||
=== Output files === | === Output files === | ||
| − | Output images and archives are stored | + | Output images and archives are stored in these locations: |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
~/workdir/voipac/imx6/yocto/fsl-release-bsp/build-dir/tmp/deploy/images | ~/workdir/voipac/imx6/yocto/fsl-release-bsp/build-dir/tmp/deploy/images | ||
Latest revision as of 12:05, 24 April 2022
This Wiki section guides through preparation and compiling images using Yocto Project.
Download and install repo utility
Note: As Freescale disabled its primary git servers, the official repositories were moved. The files for building can be accessed by following this workaround.
To download the board support package, repositories need to be installed. To prepare them follow these steps:
mkdir -pv ~/workdir/bin
# curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/workdir/bin/repo
chmod a+x ~/workdir/bin/repo
PATH=${PATH}:~/workdir/bin
Yocto Project 2.1
Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in Freescale Yocto Project User's Guide.
Initialize Yocto Project
Download the BSP Yocto Project Environment:
mkdir -pv ~/workdir/voipac/imx6/yocto/fsl-release-bsp-2.1 cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp-2.1 git config --global user.name "Your Name" git config --global user.email "Your Email" git config --list repo init -u git://git.freescale.com/imx/fsl-arm-yocto-bsp.git -b imx-4.1-krogoth
Init iMX6 Rex layer
Add iMX6 Rex support:
mkdir -pv .repo/local_manifests/
cat > .repo/local_manifests/imx6rex.xml << EOF
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote fetch="git://github.com/Voipac" name="voipac"/>
<project remote="voipac" revision="master" name="meta-fsl-arm-voipac" path="sources/meta-fsl-arm-voipac">
<copyfile src="voipac-setup.sh" dest="voipac-setup.sh"/>
</project>
</manifest>
EOF
Sync
Synchronize repositories:
cd ~/workdir/voipac/imx6/yocto/
ln -s fsl-release-bsp-2.1 fsl-release-bsp
cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp
PATH=${PATH}:~/workdir/bin
repo sync
Configure
Add Voipac meta layer into BSP:
source voipac-setup.sh
Build workarounds
Building process could get halted. This session contains few workarounds for commonly observed failures. These commands fix compiling on Ubuntu 16.04 operating system.
Issue: Preferred bootloader and kernel are overwritten during compilation fsl-image recipe
Cause and fix: fsl-image overwrite bootloader/kernel provided by meta-fsp-voipac. To remove this limitation replace '=' with '?='
Original version:
meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_u-boot_mx6 = "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/bootloader_mx6 = "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/kernel_mx6 = "linux-imx"
Modified version:
meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_u-boot_mx6 ?= "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/bootloader_mx6 ?= "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/kernel_mx6 ?= "linux-imx"
Issue: Web browser recipes are disabled
Fix: Comment out to enable
meta-browser/recipes-browser/chromium/chromium_48.0.2548.0.bb:#PNBLACKLIST[chromium] ?= "BROKEN: fails to build with gcc-6" meta-browser/recipes-browser/chromium/cef3_280796.bb:#PNBLACKLIST[cef3] ?= "BROKEN: fails to build with gcc-6" meta-browser/recipes-mozilla/firefox/firefox_38.8.0esr.bb:#PNBLACKLIST[firefox] ?= "BROKEN: fails to build with gcc-6"
Build customization
Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found:
/workdir/voipac/imx6/yocto/fsl-release-bsp/build-x11/conf/local.conf
By modifying local.conf file, custom features can be easily added:
#CORE_IMAGE_EXTRA_INSTALL += " chromium libexif"
CORE_IMAGE_EXTRA_INSTALL += " firefox stress"
LICENSE_FLAGS_WHITELIST = "commercial"
IMAGE_INSTALL_append = " \
video-input-demo \
multimedia-demo \
lpc-demo \
"
IMAGE_ROOTFS_EXTRA_SPACE_append += "+ 500000"
Working environment setup has been finished and is ready for building images.
Yocto Project 2.0
Getting the BSP
Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in Freescale Yocto Project User's Guide.
Initialize Yocto Project
Download the BSP Yocto Project Environment:
mkdir -pv ~/workdir/voipac/imx6/yocto/fsl-release-bsp-2.0 cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp-2.0 git config --global user.name "Your Name" git config --global user.email "Your Email" git config --list repo init -u git://git.freescale.com/imx/fsl-arm-yocto-bsp.git -b imx-4.1.15-1.0.0_ga
Init iMX6 Rex layer
Add iMX6 Rex support:
mkdir -pv .repo/local_manifests/
cat > .repo/local_manifests/imx6rex.xml << EOF
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote fetch="git://github.com/Voipac" name="voipac"/>
<project remote="voipac" revision="refs/tags/v2.1" name="meta-fsl-arm-voipac" path="sources/meta-fsl-arm-voipac">
<copyfile src="voipac-setup.sh" dest="voipac-setup.sh"/>
</project>
</manifest>
EOF
Sync
Synchronize repositories:
cd ~/workdir/voipac/imx6/yocto/
ln -s fsl-release-bsp-2.0 fsl-release-bsp
cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp
PATH=${PATH}:~/workdir/bin
repo sync
Configure
Add Voipac meta layer into BSP:
source voipac-setup.sh
Build workarounds
Building process could get halted. This session contains few workarounds for commonly observed failures. These commands fix compiling on Ubuntu 16.04 operating system.
Issue: Qemu-native linking failure
Fix: Add BUILD_LDFLAGS_prepend_pn-qemu-native directive into build-dir/conf/local.conf
BUILD_LDFLAGS_prepend_pn-qemu-native = "-Wl,-rpath-link,/lib/x86_64-linux-gnu "
Issue: Preferred bootloader and kernel are overwritten during compilation fsl-image recipe
Cause and fix: fsl-image overwrite bootloader/kernel provided by meta-fsp-voipac. To remove this limitation replace '=' with '?='
Original version:
meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_u-boot_mx6 = "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/bootloader_mx6 = "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/kernel_mx6 = "linux-imx"
Modified version:
meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_u-boot_mx6 ?= "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/bootloader_mx6 ?= "u-boot-imx" meta-fsl-bsp-release/imx/meta-sdk/conf/distro/include/fsl-imx-preferred-env.inc:PREFERRED_PROVIDER_virtual/kernel_mx6 ?= "linux-imx"
Build customization
Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found:
/workdir/voipac/imx6/yocto/fsl-release-bsp/build-x11/conf/local.conf
By modifying local.conf file, custom features can be easily added:
CORE_IMAGE_EXTRA_INSTALL += " chromium"
CORE_IMAGE_EXTRA_INSTALL += " packagegroup-fslc-gstreamer1.0-full"
LICENSE_FLAGS_WHITELIST = "commercial"
IMAGE_INSTALL_append = " \
video-input-demo \
multimedia-demo \
"
Working environment setup has been finished and is ready for building images.
Yocto Project 1.7
Every OS requires different set of installed packages. More information about Yocto requirements could be acquired in Freescale Yocto Project User's Guide.
Initialize Yocto Project
Download the BSP Yocto Project Environment:
mkdir -pv ~/workdir/voipac/imx6/yocto/fsl-release-bsp-1.7 cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp-1.7 git config --global user.name "Your Name" git config --global user.email "Your Email" git config --list repo init -u git://git.freescale.com/imx/fsl-arm-yocto-bsp.git -b imx-3.14.28-1.0.1_patch
Init iMX6 Rex layer
Add iMX6 Rex support:
mkdir -pv .repo/local_manifests/
cat > .repo/local_manifests/imx6rex.xml << EOF
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote fetch="git://github.com/Voipac" name="voipac"/>
<project remote="voipac" revision="v1_3_patch" name="meta-fsl-arm-voipac" path="sources/meta-fsl-arm-voipac">
<copyfile src="voipac-setup.sh" dest="voipac-setup.sh"/>
</project>
</manifest>
EOF
Sync
Synchronize repositories:
cd ~/workdir/voipac/imx6/yocto/
ln -s fsl-release-bsp-1.7 fsl-release-bsp
cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp
PATH=${PATH}:~/workdir/bin
repo sync
Configure
Add Voipac meta layer into BSP:
source voipac-setup.sh
Build workarounds
Building process could get halted. This session contains few workarounds for commonly observed failures. These commands fix compiling on Ubuntu 16.04 operating system.
Issue: GCC compilator downgrade
Cause and fix: Ubuntu uses GCC-5 by default but some Yocto (branch imx-3.14.28-1.0.1_patch) packages are not compatible with this compiler. To keep the functionality, switching to older version is required:
sudo apt-get install gcc-4.8 g++-4.8 sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8 100 --slave /usr/bin/g++ g++ /usr/bin/g++-4.8 sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-5 50 --slave /usr/bin/g++ g++ /usr/bin/g++-5 sudo update-alternatives --config gcc
Issue: Qemu-native compilation failure
Cause and fix: Ubuntu uses newer version of the SDL libraries which are not compatible with Yocto (branch imx-3.14.28-1.0.1_patch).
This commands needs to be run after every "source *" command to commend out SDL support:
sed -i 's/^PACKAGECONFIG_append_pn-qemu-native/#PACKAGECONFIG_append_pn-qemu-native/' conf/local.conf sed -i 's/^PACKAGECONFIG_append_pn-nativesdk-qemu/#PACKAGECONFIG_append_pn-nativesdk-qemu/' conf/local.conf
Build customization
Configuration files are created during setup (setup-environment, fsl-setup-release.sh). The file to update can be found:
/workdir/voipac/imx6/yocto/fsl-release-bsp/build-x11/conf/local.conf
By modifying local.conf file, custom features can be easily added:
CORE_IMAGE_EXTRA_INSTALL += " chromium"
CORE_IMAGE_EXTRA_INSTALL += " packagegroup-fslc-gstreamer1.0-full"
LICENSE_FLAGS_WHITELIST = "commercial"
IMAGE_INSTALL_append = " \
video-input-demo \
multimedia-demo \
"
Working environment setup has been finished and is ready for building images.
Building images
Locate the Yocto working directory:
cd ~/workdir/imx6/yocto/fsl-release-bsp
Supported machines (Production):
imx6-openrexbasic imx6-openrexmax imx6-openrexmax4g imx6-openrexultra imx6-rexbasic imx6-rexpro imx6-rexultra imx6-tinyrexlite imx6-tinyrexbasic imx6-tinyrexpro imx6-tinyrexmax imx6-tinyrexmax4g imx6-tinyrexultra
Supported machines (Prototypes):
imx6dl-rex imx6s-tinyrex imx6q-tinyrex
Supported distros (Freescale):
fsl-imx-x11 - Only X11 graphics fsl-imx-wayland - Wayland weston graphics fsl-imx-xwayland - Wayland graphics and X11. X11 applications using EGL are not supported fsl-imx-fb - Frame Buffer graphics - no X11 or Wayland
Console image
Setup and build for Console image:
MACHINE=<machine name> source setup-environment build-dir MACHINE=<machine name> bitbake core-image-base
Toolchain
Setup and build for Toolchain:
MACHINE=<machine name> bitbake core-image-base -c populate_sdk
FSL GUI image
Setup and build for FSL GUI image:
Yocto 2.1
DISTRO=<distro name> MACHINE=<machine name> source fsl-setup-release.sh -b bld-u1604-x11 DISTRO=<distro name> MACHINE=<machine name> bitbake fsl-image-gui
Yocto 2.0/1.7
MACHINE=<machine name> source fsl-setup-release.sh -b build-x11 -e x11 MACHINE=<machine name> bitbake fsl-image-gui
Voipac image
Setup and build for Voipac image:
MACHINE=<machine name> source setup-environment build-vpac MACHINE=<machine name> bitbake vpac-image-full-cmdline MACHINE=<machine name> bitbake vpac-image-full-cmdline -c populate_sdk
Output files
Output images and archives are stored in these locations:
~/workdir/voipac/imx6/yocto/fsl-release-bsp/build-dir/tmp/deploy/images ~/workdir/voipac/imx6/yocto/fsl-release-bsp/build-dir/tmp/deploy/sdk
Storing images to SD card
cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp/build-dir/tmp/deploy/images/<machine name> sudo dd if=<image name>.sdcard of=/dev/sd<partition> bs=1M && sync
or
cd ~/workdir/voipac/imx6/yocto/fsl-release-bsp/build-dir/tmp/deploy/images/<machine name> gunzip -c core-image-base-<machine name>.sdcard.gz | sudo dd of=/dev/sd<partition> bs=1M && sync