Difference between revisions of "NXP MIPI-CSI Camera Set"Voipac webshop

From Voipac Wiki
Jump to navigation Jump to search
 
Line 58: Line 58:
 
=== Capture single JPEG picture ===
 
=== Capture single JPEG picture ===
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
root@imx8mq-voipac:~# gst-launch-1.0 v4l2src num-buffers=1 ! jpegenc ! filesink location=sample_image.jpeg
+
root@imx8mq-voipac:~# gst-launch-1.0 v4l2src num-buffers=1 ! jpegenc ! filesink location=sample_image_nxp.jpeg
 
Setting pipeline to PAUSED ...
 
Setting pipeline to PAUSED ...
 
Pipeline is live and does not need PREROLL ...
 
Pipeline is live and does not need PREROLL ...
Line 76: Line 76:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
The image stored in local media with name sample_image.jpeg
+
The image stored in local media with name sample_image_nxp.jpeg
  
 
=== Video preview ===
 
=== Video preview ===

Latest revision as of 22:08, 11 February 2025

MINISASTOCSI is a MIPI-CSI interface camera kit, based on OmniVision chipset OV5640 Detection, performance and essential commands are described here.

hot-plug.png

MINISASTOCSI-Voipac-BB.png
MINISASTOCSI is a MIPI-CSI interface camera connected to iMX Development Baseboard

Kernel detection

root@imx8mq-voipac:~# dmesg | grep ov56
[    2.398433] ov5640_mipi 1-003c: No pin available
[    2.403090] ov5640_mipi 1-003c: No sensor pwdn pin available
[    2.408777] ov5640_mipi 1-003c: No sensor reset pin available
[    2.414571] ov5640_regulator_enable: cannot get io voltage error - err:-517
[    2.539603] ov5640_mipi 2-003c: No pin available
[    2.549079] ov5640_mipi 2-003c: No sensor reset pin available
[    2.554887] ov5640_regulator_enable: cannot get io voltage error - err:-517
[    2.999855] ov5640_mipi 1-003c: No pin available
[    3.005558] ov5640_mipi 1-003c: No sensor reset pin available
[    3.012003] ov5640_mipi 1-003c: 1-003c supply DVDD not found, using dummy regulator
[    3.019785] ov5640_mipi 1-003c: 1-003c supply AVDD not found, using dummy regulator
[    3.039290] ov5640_mipi 1-003c: Read reg error: reg=300a
[    3.044691] ov5640_mipi 1-003c: Camera is not found
[    3.051918] ov5640_mipi 2-003c: No pin available
[    3.062814] ov5640_mipi 2-003c: No sensor reset pin available
[    3.069209] ov5640_mipi 2-003c: 2-003c supply DVDD not found, using dummy regulator
[    3.076945] ov5640_mipi 2-003c: 2-003c supply AVDD not found, using dummy regulator
[    4.291092] mxc-mipi-csi2_yav 30a70000.mipi_csi: Registered sensor subdevice: ov5640_mipi 2-003c
[    4.304334] ov5640_mipi 2-003c: Camera is found

I2C detection

MINISASTOCSI camera chip is connected via I2C3. The most important address for correct detection is 0x3c.

root@imx8mq-voipac:~# i2cdetect -y 2
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: UU UU UU UU -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- UU -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --


MINISASTOCSI camera can be also connected to I2C2 interface by moving 0R resistors. However second camera connected on CSI-2 interface have same address 0x3c as MINISASTOCSI camera connected on CSI-1 interface.
CSI1-I2C2 and I2C3.png


Gstreamer

Capture single JPEG picture

root@imx8mq-voipac:~# gst-launch-1.0 v4l2src num-buffers=1 ! jpegenc ! filesink location=sample_image_nxp.jpeg
Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
[ 1301.273334] ov5640_mipi 2-003c: s_stream: 1
Got EOS from element "pipeline0".[ 1303.353181] ov5640_mipi 2-003c: s_stream: 0

Execution ended after 0:00:02.649996154
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
root@imx8mq-voipac:~# ls
sample_image.jpeg
root@imx8mq-voipac:~#

The image stored in local media with name sample_image_nxp.jpeg

Video preview

root@imx8mq-voipac:~# GST_DEBUG=GST_BUFFER:5 gst-launch-1.0 v4l2src ! 'video/x-raw,framerate=30/1' ! autovideosink
Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
0:00:00.842776580   469 0xaaaadc001c00 DEBUG             GST_BUFFER gstbuffer.c:2279:gst_buffer_add_meta: alloc metadata 0xaaaadc0623c0 (GstVideoMeta) of size 112
0:00:00.842935198   469 0xaaaadc001c00 DEBUG             GST_BUFFER gstbuffer.c:2279:gst_buffer_add_meta: alloc metadata 0xaaaadc062440 (GstVideoMeta) of size 112
0:00:00.843278592   469 0xaaaadc001c00 DEB[ 1415.898001] ov5640_mipi 2-003c: s_stream: 1
UG             GST_BUFFER gstbuffer.c:2279:gst_buffer_add_meta: alloc metadata 0xaaaadc0624c0 (GstVideoMeta) of size 112
0:00:00.843338584   469 0xaaaadc001c00 DEBUG             GST_BUFFER gstbuffer.c:2279:gst_buffer_add_meta: alloc metadata 0xaaaadc062540 (GstVideoMeta) of size 112
[ 1416.119964] skip frame 1

The video stream from camera can be displayed on display/monitor