Difference between revisions of "iMX6 TinyRex USB Booting"
Jump to navigation
Jump to search
(Created page with "Category:iMX6 TinyRex Development kit Category:iMX6 TinyRex Recovery <!-- --> <div style="float:right">__TOC__</div> These steps guides through loading a bootloader v...") |
|||
| Line 2: | Line 2: | ||
[[Category:iMX6 TinyRex Recovery]] | [[Category:iMX6 TinyRex Recovery]] | ||
<!-- --> | <!-- --> | ||
| − | |||
These steps guides through loading a bootloader via USB OTG interface. It might be useful during recovery or bootloader update. | These steps guides through loading a bootloader via USB OTG interface. It might be useful during recovery or bootloader update. | ||
| Line 12: | Line 11: | ||
''''' Recommended SW: ''''' | ''''' Recommended SW: ''''' | ||
| − | * [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/tools&dl=mfgtools-Imx6Rex.zip MfgTool] | + | * [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/tools&dl=mfgtools-Imx6Rex.zip MfgTool] feature |
| + | * Serial line terminal | ||
| + | |||
| + | == Procedure == | ||
| + | Connect USB cable to USB port on your computer and Development Kit USB OTG port. <br /><br /> | ||
| + | |||
| + | Short BOOT_MODE jumper on iMX6 TinyRex Base Board and power on the board: | ||
| + | [[image:iMX6_TinyRex_Development_kit-Boot_mode_USB.jpg|400px]] | ||
Revision as of 08:54, 15 March 2021
These steps guides through loading a bootloader via USB OTG interface. It might be useful during recovery or bootloader update.
Recommended HW:
- PC with USB port
- Voipac iMX6 TinyRex Development Kit
- USB to Micro-USB cable
Recommended SW:
- MfgTool feature
- Serial line terminal
Procedure
Connect USB cable to USB port on your computer and Development Kit USB OTG port.
Short BOOT_MODE jumper on iMX6 TinyRex Base Board and power on the board: 400px
