Difference between revisions of "iMX6 TinyRex Memory Calibration"
Jump to navigation
Jump to search
(Created page with "Category:iMX6 TinyRex Development kit Category:iMX6 TinyRex Peripherals <!-- --> <div style="float:right">__TOC__</div> ''''Caution:'''' This procedure is intended fo...") |
|||
| Line 21: | Line 21: | ||
* i.MX6 TinyRex Module and Base board | * i.MX6 TinyRex Module and Base board | ||
* PC controlling the test | * PC controlling the test | ||
| − | * [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit | + | * [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/tools&dl=DDR_Stress_Tester_V1.0.3_Imx6TinyRex.zip DDR Stress Tester 1.0.3] application |
| − | * [ | + | * [hhttp://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/tools&dl=DDR_Stress_Tester_V2.52_Imx6Rex.zip DDR Stress Tester 2.52] application |
| + | |||
| + | == Calibration == | ||
| + | === Stress tester v2.52 (Ultra) === | ||
| + | * 4GB RAM - DDR_Stress_Tester_V2.52_Imx6Rex/script/voipac/imx6qp_tinyrex_ultra_MT41K512M16HA-125.inc | ||
| + | * 2GB RAM - DDR_Stress_Tester_V2.52_Imx6Rex/script/voipac/imx6qp_tinyrex_ultra_MT41K256M16HA-125.inc | ||
| + | |||
| + | === Stress tester v1.0.3 (Max, Pro, Basic, Lite) === | ||
| + | DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6s_tinyrex_MT41J64M16JT-15E.inc | ||
| + | DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6s_tinyrex_MT41K128M16JT-125.inc | ||
| + | DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6d_tinyrex_MT41K128M16JT-125.inc | ||
| + | DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6q_tinyrex_MT41K256M16HA-125.inc | ||
| + | |||
| + | == Example operation == | ||
| + | [[image:i.MX6-DDR_Test_Tool.jpg|600px]] | ||
Revision as of 21:45, 14 March 2021
'Caution:' This procedure is intended for manufacturing use only and should be never applied for shipped iMX6 TinyRex boards.
Description
Memory calibration procedure consists from following steps:
- Short BOOT_MODE jumper on i.MX6 TinyRex Base board
- Connect USB_OTG port to host PC utilizing microUSB-USB cable
- Power on i.MX6 TinyRex Development kit
- Execute DDR Stress Tester at host PC using command line
- Configure DDR Stress Tester and calibrate memory
- Remove BOOT_MODE jumper
- Power off i.MX6 TinyRex Development kit
Requirements
- micro USB cable
- 5V 2A Power supply
- i.MX6 TinyRex Module and Base board
- PC controlling the test
- DDR Stress Tester 1.0.3 application
- [hhttp://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/tools&dl=DDR_Stress_Tester_V2.52_Imx6Rex.zip DDR Stress Tester 2.52] application
Calibration
Stress tester v2.52 (Ultra)
- 4GB RAM - DDR_Stress_Tester_V2.52_Imx6Rex/script/voipac/imx6qp_tinyrex_ultra_MT41K512M16HA-125.inc
- 2GB RAM - DDR_Stress_Tester_V2.52_Imx6Rex/script/voipac/imx6qp_tinyrex_ultra_MT41K256M16HA-125.inc
Stress tester v1.0.3 (Max, Pro, Basic, Lite)
DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6s_tinyrex_MT41J64M16JT-15E.inc DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6s_tinyrex_MT41K128M16JT-125.inc DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6d_tinyrex_MT41K128M16JT-125.inc DDR_Stress_Tester.exe -t mx6x -df scripts\MX6_series_boards\Imx6TinyRex\imx6q_tinyrex_MT41K256M16HA-125.inc
