Difference between revisions of "TFT Optrex Display Set"
Jump to navigation
Jump to search
m (Voipac moved page TFT Display Optrex Set to TFT Optrex Display Set without leaving a redirect) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | [[Category:i.MX53 SODIMM PC - Development | + | [[Category:i.MX53 SODIMM PC - Development Kit]] |
| − | [[Category:i.MX51 SODIMM PC - Development | + | [[Category:i.MX51 SODIMM PC - Development Kit]] |
| − | [[Category:i.MX25 SODIMM PC - Development | + | [[Category:i.MX25 SODIMM PC - Development Kit]] |
<!-- --> | <!-- --> | ||
| − | + | This section shows information about Optrex TFT display. This display with resistive touch screen is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development Kits. It is supported in OS Linux, OS Android and OS WinCE 6.0. | |
| − | This section shows information about Optrex TFT display. This display with resistive touch screen is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development | ||
<br /><br /> | <br /><br /> | ||
| − | The display datasheet can be downloaded from [http://downloads.voipac.com/files/i.MX53_SODIMM_PC- | + | The display datasheet can be downloaded from [http://downloads.voipac.com/files/i.MX53_SODIMM_PC-Development_Kit/accessories/TFT_Optrex_display_adapter/TFT_Optrex_display-Datasheet.pdf here]. |
== Hardware connection == | == Hardware connection == | ||
| − | To make the physical connection between the board and the display easier, [http://downloads.voipac.com/files/i.MX53_SODIMM_PC- | + | To make the physical connection between the board and the display easier, [http://downloads.voipac.com/files/i.MX53_SODIMM_PC-Development_Kit/accessories/TFT_Optrex_display_adapter/i.MX25_SODIMM_Base_Board-TFT_Optrex_display_adapter-Schematic.pdf Optrex TFT display adapter] was designed to connect the set together. |
[[image:i.MX25_SODIMM_Base_Board-TFT_Optrex_display_adapter-Base_board_connection.jpg|800px]]<br /> | [[image:i.MX25_SODIMM_Base_Board-TFT_Optrex_display_adapter-Base_board_connection.jpg|800px]]<br /> | ||
To implement the display capabilities, following connections need to be made: | To implement the display capabilities, following connections need to be made: | ||
Latest revision as of 18:30, 23 April 2022
This section shows information about Optrex TFT display. This display with resistive touch screen is assigned to be used with the i.MX53, i.MX51 and i.MX25 SODIMM PC - Development Kits. It is supported in OS Linux, OS Android and OS WinCE 6.0.
The display datasheet can be downloaded from here.
Hardware connection
To make the physical connection between the board and the display easier, Optrex TFT display adapter was designed to connect the set together.
To implement the display capabilities, following connections need to be made:
- Optrex TFT display adapter is plugged into the Base Board H200 male header. Make sure pin number 1 is positioned correctly.
- A flexible flat cable is used for video connection between the adapter CN1 connector and the display
- Touch screen feature is established by plugging additional four signal FFC cable into CN2 connector. This connector is a top size type to ensure easier connection. Extra care while plugging is important as this cable is shorter and more fragile then the one used for the video interface.
