Difference between revisions of "iMX6 TinyRex Ultra Creating Bootable microSD Card"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX6 TinyRex Max Module.<br /> | + | On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX6 TinyRex Max Module.<br /><br /> |
''''' Recommended HW: ''''' | ''''' Recommended HW: ''''' | ||
* PC with microSD port | * PC with microSD port | ||
| Line 7: | Line 7: | ||
* [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/Ftools&dl=USBWriter-1.3.zip USBWriter] | * [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/Ftools&dl=USBWriter-1.3.zip USBWriter] | ||
* [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/module/software/yocto/binaries Appropriate Image files] | * [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/module/software/yocto/binaries Appropriate Image files] | ||
| − | + | ||
| + | == Using USBWriter feature == | ||
Open USBWriter. Browse source file (appropriate fsl-image). Select target device.<br /> | Open USBWriter. Browse source file (appropriate fsl-image). Select target device.<br /> | ||
[[image:iMX6_TinyRex_Development_kit-USBWriter-Target_select.jpg|400px]] | [[image:iMX6_TinyRex_Development_kit-USBWriter-Target_select.jpg|400px]] | ||
| − | <br /> | + | <br /><br /> |
Click on Write button and confirm the procedure.<br /> | Click on Write button and confirm the procedure.<br /> | ||
[[image:iMX6_TinyRex_Development_kit-USBWriter-Confirm.jpg|400px]]<br /><br /> | [[image:iMX6_TinyRex_Development_kit-USBWriter-Confirm.jpg|400px]]<br /><br /> | ||
| − | [[image:iMX6_TinyRex_Development_kit-USBWriter-Progress.jpg|400px]]<br /><br /> | + | [[image:iMX6_TinyRex_Development_kit-USBWriter-Progress.jpg|400px]] |
| + | <br /><br /> | ||
| + | Bootable microSD Card is now created and prepared for use.<br /> | ||
[[image:iMX6_TinyRex_Development_kit-USBWriter-Success.jpg|400px]] | [[image:iMX6_TinyRex_Development_kit-USBWriter-Success.jpg|400px]] | ||
| − | |||
| − | |||
Revision as of 14:08, 10 March 2021
On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX6 TinyRex Max Module.
Recommended HW:
- PC with microSD port
- microSD card
Recommended SW:
Using USBWriter feature
Open USBWriter. Browse source file (appropriate fsl-image). Select target device.
400px
Click on Write button and confirm the procedure.
400px
400px
Bootable microSD Card is now created and prepared for use.
400px
