Difference between revisions of "iMX6 TinyRex Ultra Creating Bootable microSD Card"

From Voipac Wiki
Jump to navigation Jump to search
 
(16 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
On this page the recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. Following example shows steps used for iMX6 TinyRex Max Module.
+
[[Category:iMX6 TinyRex Development Kit]]
 +
[[Category:iMX6 TinyRex Ultra]]
 +
[[Category:iMX6 TinyRex Recovery]]
 +
<!-- -->
 +
<div style="float:right">__TOC__</div>
 +
The recommended procedure for creating a micro SD card contained with the required firmware and software is shown. The following example shows steps used for iMX6 TinyRex Module Ultra.<br /><br />
 
''''' Recommended HW: '''''
 
''''' Recommended HW: '''''
−
* PC with microSD port
+
* PC with microSD port (or an external SD reader)
 
* microSD card
 
* microSD card
  
 
''''' Recommended SW: '''''
 
''''' Recommended SW: '''''
−
* [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/Ftools&dl=USBWriter-1.3.zip USBWriter]
+
* [http://downloads.voipac.com/files/iMX6_TinyRex_Development_Kit/tools/USBWriter-1.3.zip USBWriter]
−
* [http://downloads.voipac.com/index.php?p=iMX6_TinyRex_Development_kit/module/software/yocto/binaries Appropriate Image files]
+
* [http://downloads.voipac.com/files/iMX6_TinyRex_Development_Kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexultra-2.3.sdcard.gz Appropriate Image file]
−
<br />
+
 
−
Open USBWriter. Browse source file (appropriate fsl-image). Select target device.<br />
+
== Windows ==
−
[[image:iMX6_TinyRex_Development_kit-USBWriter-Target_select.jpg|400px]]
+
 
−
<br />
+
=== Using USBWriter feature ===
−
Click on Write button and confirm the procedure.<br />
+
Some images need to be unpacked first. GZ files can be opened using Total Commander or by installing [https://www.winzip.com/win/en/tar-gz-file.html TAR-GZ file extension].
−
[[image:iMX6_TinyRex_Development_kit-USBWriter-Confirm.jpg|400px]]<br />
+
<br /><br />
−
[[image:iMX6_TinyRex_Development_kit-USBWriter-Progress.jpg|400px]]<br />
+
Open USBWriter. Browse source file (appropriate fsl-image). Select target device:<br />
−
[[image:iMX6_TinyRex_Development_kit-USBWriter-Success.jpg|400px]]
+
[[image:iMX6_TinyRex_Development_Kit-USBWriter-Target_select.png|400px]]
−
<br />
+
<br /><br />
−
Bootable microSD Card is now created and prepared for use.
+
Click on Write button and confirm the procedure:<br />
 +
[[image:iMX6_TinyRex_Development_Kit-USBWriter-Confirm.png|400px]]<br /><br />
 +
[[image:iMX6_TinyRex_Development_Kit-USBWriter-Progress.png|400px]]
 +
<br /><br />
 +
Bootable microSD Card is now created and prepared for use:<br />
 +
[[image:iMX6_TinyRex_Development_Kit-USBWriter-Success.png|400px]]
 +
 
 +
== Linux ==
 +
=== Downloading image ===
 +
<syntaxhighlight lang="bash">
 +
mkdir -pv ~/workdir/imx6/rootfs/yocto
 +
cd ~/workdir/imx6/rootfs/yocto
 +
wget http://downloads.voipac.com/files/iMX6_TinyRex_Development_Kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexultra-2.3.sdcard.gz
 +
</syntaxhighlight>
 +
 
 +
=== Extracting binary files ===
 +
<syntaxhighlight lang="bash">
 +
gunzip -c fsl-image-gui-imx6-tinyrexultra-2.3.sdcard.gz | sudo dd of=/dev/mmcblk0 conv=sync bs=64K
 +
</syntaxhighlight>
 +
or
 +
<syntaxhighlight lang="bash">
 +
sudo dd if=fsl-image-gui-imx6-tinyrexultra-1.3.sdcard of=/dev/mmcblk0 conv=sync bs=64K
 +
</syntaxhighlight>

Latest revision as of 20:54, 26 October 2021

The recommended procedure for creating a micro SD card contained with the required firmware and software is shown. The following example shows steps used for iMX6 TinyRex Module Ultra.

Recommended HW:

  • PC with microSD port (or an external SD reader)
  • microSD card

Recommended SW:

Windows

Using USBWriter feature

Some images need to be unpacked first. GZ files can be opened using Total Commander or by installing TAR-GZ file extension.

Open USBWriter. Browse source file (appropriate fsl-image). Select target device:
iMX6 TinyRex Development Kit-USBWriter-Target select.png

Click on Write button and confirm the procedure:
iMX6 TinyRex Development Kit-USBWriter-Confirm.png

iMX6 TinyRex Development Kit-USBWriter-Progress.png

Bootable microSD Card is now created and prepared for use:
iMX6 TinyRex Development Kit-USBWriter-Success.png

Linux

Downloading image

mkdir -pv ~/workdir/imx6/rootfs/yocto
cd ~/workdir/imx6/rootfs/yocto
wget http://downloads.voipac.com/files/iMX6_TinyRex_Development_Kit/module/software/yocto/binaries/fsl-image-gui-imx6-tinyrexultra-2.3.sdcard.gz

Extracting binary files

gunzip -c fsl-image-gui-imx6-tinyrexultra-2.3.sdcard.gz | sudo dd of=/dev/mmcblk0 conv=sync bs=64K

or 

sudo dd if=fsl-image-gui-imx6-tinyrexultra-1.3.sdcard of=/dev/mmcblk0 conv=sync bs=64K
Retrieved from "https://wiki.voipac.com/index.php?title=iMX6_TinyRex_Ultra_Creating_Bootable_microSD_Card&oldid=3185"