Difference between revisions of "iMX6 TinyRex Ultra Recovery"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | [[Category:iMX6 TinyRex Development | + | [[Category:iMX6 TinyRex Development Kit]] |
[[Category:iMX6 TinyRex Ultra]] | [[Category:iMX6 TinyRex Ultra]] | ||
[[Category:iMX6 TinyRex Recovery]] | [[Category:iMX6 TinyRex Recovery]] | ||
| Line 7: | Line 7: | ||
The recovery procedure consists of following steps: | The recovery procedure consists of following steps: | ||
* Creating bootable SD card | * Creating bootable SD card | ||
| − | * | + | * Resetting module |
== Creating bootable SD card == | == Creating bootable SD card == | ||
Latest revision as of 23:27, 23 October 2021
Description
The recovery procedure consists of following steps:
- Creating bootable SD card
- Resetting module
Creating bootable SD card
Follow these steps to prepare the SD card
Configuration
Updating U-Boot
setenv ipaddr 192.168.0.150 setenv serverip 192.168.0.1 run update_uboot
Updating Device Tree
setenv ipaddr 192.168.0.150 setenv serverip 192.168.0.1 run update_fdt
Updating Kernel
setenv ipaddr 192.168.0.150 setenv serverip 192.168.0.1 run update_kernel