Difference between revisions of "iMX6 TinyRex Controlling the Development Kit"
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
|} | |} | ||
''''' Default serial port settings: ''''' | ''''' Default serial port settings: ''''' | ||
| − | Speed (baud): 115200 | + | * Speed (baud): 115200 |
| − | Data bits: 8 | + | * Data bits: 8 |
| − | Stop bits: 1 | + | * Stop bits: 1 |
| − | Parity: None | + | * Parity: None |
| − | Flow control: None | + | * Flow control: None |
Revision as of 10:20, 10 March 2021
This page guides though the first steps of controlling and operating the development kit. To prepare the working setup connect and plug in cables first.
Controlling the Development Kit over Serial Line
|
Recommended HW:
|
Recommended SW:
|
Default serial port settings:
- Speed (baud): 115200
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow control: None