View source for iMX6 OpenRex Max Creating Bootable microSD Card

[[Category:iMX6 OpenRex SBC]]
[[Category:iMX6 OpenRex Max]]
[[Category:iMX6 OpenRex Recovery]]
<!-- -->
<div style="float:right">__TOC__</div>
The recommended procedure for creating a micro SD card contained with the required firmware and software is shown here. The following example shows steps used for iMX6 OpenRex SBC in Max configuration.<br /><br />
''''' Recommended HW: '''''
* PC with microSD port (or an external SD reader)
* microSD card

''''' Recommended SW: '''''
* [http://downloads.voipac.com/files/iMX6_OpenRex_SBC/tools/USBWriter-1.3.zip USBWriter]
* [http://downloads.voipac.com/files/iMX6_OpenRex_SBC/software/yocto/binaries/fsl-image-gui-imx6-openrexmax-2.4.sdcard.gz Appropriate Image file]

== Windows ==

=== Using USBWriter feature ===
Unpack the downloaded package. GZ files can be opened using Total Commander or by installing [https://www.winzip.com/win/en/tar-gz-file.html TAR-GZ file extension].
<br /><br />
Open USBWriter. Browse source file (appropriate fsl-image). Select target device:<br />
[[image:iMX6_OpenRex_SBC-USBWriter-Target_select.png|430px]]
<br /><br />
Click on Write button and confirm the procedure:<br />
[[image:iMX6_OpenRex_SBC-USBWriter-Confirm.png|430px]]<br /><br />
[[image:iMX6_OpenRex_SBC-USBWriter-Progress.png|430px]]
<br /><br />
Bootable microSD Card is now created and prepared for use:<br />
[[image:iMX6_OpenRex_SBC-USBWriter-Success.png|430px]]

== Linux ==
=== Downloading image ===
<syntaxhighlight lang="bash">
mkdir -pv ~/workdir/imx6/rootfs/yocto
cd ~/workdir/imx6/rootfs/yocto
wget http://downloads.voipac.com/files/iMX6_OpenRex_SBC/software/yocto/binaries/fsl-image-gui-imx6-openrexmax-2.4.sdcard.gz
</syntaxhighlight>

=== Extracting binary files ===
<syntaxhighlight lang="bash">
gunzip -c fsl-image-gui-imx6-openrexmax-2.4.sdcard.gz | sudo dd of=/dev/mmcblk0 conv=sync bs=64K
</syntaxhighlight>