iMX8M Industrial Environmental chamber testing - Revision history

Voipac: /* Running the development kits at +85°C – PASS */

2025-05-14T16:14:33Z

Running the development kits at +85°C – PASS

2025-03-25T15:40:58Z

2025-03-18T16:21:21Z

Switch OFF/ON test at -40°C – PASS

2025-03-18T16:04:50Z

Running the development kits at +85°C – PASS

2025-03-18T16:03:57Z

Running the development kits at +85°C – PASS

2025-03-18T15:44:06Z

Running the development kits at -40°C – PASS

2025-03-18T15:42:59Z

Running the development kits at -40°C – PASS

2024-09-11T13:50:28Z

2023-05-30T18:01:08Z

2023-05-04T12:19:23Z

@@ Line 109: / Line 109: @@
 === Running the development kits at +85°C – PASS ===
 Test description: The pre-set temperature profile was followed until the development kits gradually reached +85°C. The kits remained around this temperature for the duration of two hours and at the end of this whole cycle all the kits were running.<br />
 [[image:iMX8M_Industrial_Kit-Env_chamber-Boards_at_+86C.jpg|800px]]
 <br /><br />

@@ Line 1: / Line 1: @@
 [[Category:iMX8M Industrial Development Kit]]
 <!-- -->
 <div style="float:right">__TOC__</div>

@@ Line 116: / Line 116: @@
 <br />
-[[image:iMX8M Industrial Kit-Env chamber-Boards snow.png|800px]]
+[[image:iMX8M Industrial Kit-Env chamber-Boards snow.jpg|800px]]
 == PC setup ==

@@ Line 109: / Line 109: @@
 Test description: The pre-set temperature profile was followed until the development kits gradually reached +85°C. The kits remained around this temperature for the duration of two hours and at the end of this whole cycle all the kits were running.<br />
 [[image:iMX8M_Industrial_Kit-Env_chamber-Boards_at_+86C.jpg|800px]]
 <br /><br />
 [[image:iMX8M_Industrial_Development_Kit-Env_chamber_at_+85C.jpg|800px]]

@@ Line 108: / Line 108: @@
 === Running the development kits at +85°C – PASS ===
 Test description: The pre-set temperature profile was followed until the development kits gradually reached +85°C. The kits remained around this temperature for the duration of two hours and at the end of this whole cycle all the kits were running.<br />
 [[image:iMX8M Industrial Kit-Env chamber-Boards at 86°C.png|800px]]
 <br /><br />

@@ Line 103: / Line 103: @@
 * the last two shows relative humidity. Humidity was not controlled during testing process.
 [[image:iMX8M Industrial Kit-Env chamber-Boards at -40C.jpg|800px]]
 <br /><br />
 [[image:iMX8M_Industrial_Development_Kit-Env_chamber_at_-40C.jpg|800px]]

@@ Line 102: / Line 102: @@
 * the second one set temperature
 * the last two shows relative humidity. Humidity was not controlled during testing process.
 [[image:iMX8M Industrial Kit-Env chamber-Boards at 40°C.png|800px]]
 <br /><br />

@@ Line 31: / Line 31: @@
 ** CM-276NF WiFi & Bluetooth Module - industrial temperature range (-30°C to +85°C)
 <br />
-All of the tested modules used standard configuration of iMX8M Development Baseboard with extended temperature range (-20°C to +70°C). The majority of tested kits used the standard heatsink sized 25x25x25mm, which is included in every development kit package, thus showcasing that this standardised heatsink performs even in very harsh conditions. One of the kits was mounted with a larger heatsink and one of the standard heatsinks was mounted with an active fan to test its impact on the performance.<br />
+All of the tested modules used standard configuration of iMX Development Baseboard with extended temperature range (-20°C to +70°C). The majority of tested kits used the standard heatsink sized 25x25x25mm, which is included in every development kit package, thus showcasing that this standardised heatsink performs even in very harsh conditions. One of the kits was mounted with a larger heatsink and one of the standard heatsinks was mounted with an active fan to test its impact on the performance.<br />
 To test the performance of the video capturing capabilities of the development kits under extreme conditions, NXP MIPI-CSI and Digilent MIPI-CSI cameras were included in the tested setups.
 <br />

← Older revision		Revision as of 18:01, 30 May 2023
Line 36:		Line 36:

	The setup in the environmental chamber:<br />		The setup in the environmental chamber:<br />
−	~~[[image:iMX8M_Industrial_Development_Kits-Enviromental_chamber_overview.jpg\|800px]]<br /><br />~~
−
	[[image:iMX8M_Industrial_Development_Kits-Enviromental_chamber_overview_with_description.jpg\|800px]]		[[image:iMX8M_Industrial_Development_Kits-Enviromental_chamber_overview_with_description.jpg\|800px]]

@@ Line 128: / Line 128: @@
 The setup of the environmental chamber cables and out-of-chamber equipment:
 <br />
 [[image:iMX8M Industrial Development Kit-Climate chamber overview.jpg|800px]]