Voipac Wiki - Recent changes [en]

BOE LVDS Capacitive Display Set

Voipac — Wed, 05 Aug 2026 10:28:28 GMT

Voipac — Wed, 05 Aug 2026 08:58:38 GMT

Flashing procedure

Voipac — Wed, 05 Aug 2026 08:55:29 GMT

New page

Voipac — Wed, 05 Aug 2026 08:54:08 GMT

@@ Line 2: / Line 2: @@
 <div style="float:right">__TOC__</div>
-This section shows information about the BOE LVDS LCD Display with Capacitive Touch Panel (CTP) Set. The iMX93 Industrial Development Kit in this configuration is equipped with Yocto 5.0 (Scarthgap) (Linux version 6.6.52) to support LVDS display with a touchscreen layer. In this case, the display is not installed/attached to the iMX Development Baseboard.
+This section provides information about the BOE LVDS LCD Display with Capacitive Touch Panel (CTP) Set. The iMX93 Industrial Development Kit in this configuration is equipped with Yocto 5.0 (Scarthgap) (Linux version 6.6.52) to support LVDS display with a touchscreen layer. The display set comes with convenient acrylic stand.
 [[File:iMX93 BOE Display.png|800px]]
 ==Required Components==
-The iMX93 Industrial Kit Display Set includes a compact ready-to-use solution. To assemble them together, the following mechanical and electrical accessories were designed and selected to be parts of the Display set:
+The iMX93 Industrial Kit Display Set is compact and ready-to-use solution. The following mechanical and electrical accessories are included in the Display set:
 * LVDS LCD Display: BOE EV121WXM-N10-1850 (DY1212W-4856 12.1" (WXGA) TFT LCD) 1024*800 RGB with Capacitive Touch Panel (CTP)

@@ Line 32: / Line 32: @@
 * Plug USB Micro-B cable to baseboard CONSOLE connector and PC<br />'''''Note:''''' Make sure that UART1 and UART2 jumpers are in CP2105 positions (USB/UART bridge).<br />
-[[image:iMX_Development_Baseboard-Serial_console_jumpers.png|594px]]<br /><br />
+[[image:iMX_Development_Baseboard-Serial_console_jumpers-iMX8M_COM.png|594px]]<br /><br />
 * Plug USB-C cable to baseboard USB-C connector and PC<br />'''''Note:''''' Powering of the development kit is not required during the flashing procedure.<br />'''''Note:''''' After connecting 2 development board cables, 2 serial ports named ''Silicon Labs CP210x USB to UART Bridge'' should appear in the controlling PC.<br />